Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Instrumentación de prueba y validación de sala limpia
Dispositivo de medición de flujo de válvula de aire
A compact cone-type airflow measurement device for direct supply and extract volume-flow checks at circular disc valves and small ventilation terminals.
- Full-flow capture at circular air valves.
- Integrated straightener controls swirl effects.
- Compact bidirectional direct-flow display.
Introducción del producto
This device seals a shaped low-resistance cone around a circular air valve and guides the full stream through an integrated flow straightener and sensing grid. The detachable digital meter displays supply or extract volume flow without requiring a separate area calculation. Its compact mouth is easier to position on small ceiling and wall terminals than a full-size capture hood.
Características clave
Integrated straightener reduces swirl-related measurement variation.
Reversible sensing supports supply and extract terminals.
Direct volume-flow display removes manual area conversion.
Soft perimeter seal limits bypass around the valve face.
Compact handheld format suits congested ceiling locations.
Preocupaciones del producto del cliente
Circular air valves generate curved and swirling flow patterns that are difficult to quantify with a point sensor and often sit where a full-size hood cannot be positioned.
Point velocity readings are unreliable in the swirling flow near a disc valve.The cone captures the full stream and the straightener conditions it before measurement.
Air bypass around the measuring device understates terminal flow.A compliant perimeter gasket seals against the surrounding ceiling or wall surface.
Large capture hoods are awkward around closely spaced ceiling services.The compact circular cone reaches small valves with less clearance.
Supply and extract checks may otherwise require different setups.Bidirectional sensing reports both flow directions through the same cone.
Aplicaciones típicas
Circular ceiling air-valve balancingCleanroom supply terminal verificationExtract valve flow checksSmall grille commissioningRoutine ventilation maintenance
Parámetros técnicos
Representative compact valve-flow device dimensions are listed below; cone diameter, handle reach and measurement range can be selected for terminal size.
| Materiales Core | Molded engineering-polymer cone, elastomer perimeter seal and differential-pressure sensing grid |
|---|---|
| Panel de espesor | Typically 2.5-4.0 mm for the molded cone wall |
| Ancho efectivo | Approximately 250-350 mm across the capture mouth |
| Longitud máxima | Approximately 400-550 mm including handle and display |
| Acero frente a espesor | Typically 0.5-0.8 mm for stainless sensing-grid elements |
| Densidad Core | Approximately 1050-1200 kg/m³ for the engineered polymer cone |
| Conductividad térmica | Approximately 0.18-0.25 W/(m·K) for the engineered polymer housing |
| Superficie acabada | Matte white capture cone with graphite handle, black seal and blue-gray display |
| Tipo conjunto | Detachable meter coupling with sealed cone-to-grid interface and soft valve-face gasket |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Multiple cone mouth diametersSupply/extract bidirectional meterTelescopic support handleWireless displayProtective transport bagTraceable calibration service
Planning a Air Valve Flow Measurement Device specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
