Air valve flow measurement device in three-quarter full view

Instrumen Ujian dan Pengesahan Bilik Bersih

Peranti Pengukuran Aliran Injap Udara

A compact cone-type airflow measurement device for direct supply and extract volume-flow checks at circular disc valves and small ventilation terminals.

Full-flow capture at circular air valves.
Integrated straightener controls swirl effects.
Compact bidirectional direct-flow display.

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This device seals a shaped low-resistance cone around a circular air valve and guides the full stream through an integrated flow straightener and sensing grid. The detachable digital meter displays supply or extract volume flow without requiring a separate area calculation. Its compact mouth is easier to position on small ceiling and wall terminals than a full-size capture hood.

Ciri-ciri Utama

Shaped cone captures the complete flow from a circular air valve.

Integrated straightener reduces swirl-related measurement variation.

Reversible sensing supports supply and extract terminals.

Direct volume-flow display removes manual area conversion.

Soft perimeter seal limits bypass around the valve face.

Compact handheld format suits congested ceiling locations.

Kebimbangan Produk Pelanggan

Circular air valves generate curved and swirling flow patterns that are difficult to quantify with a point sensor and often sit where a full-size hood cannot be positioned.

Point velocity readings are unreliable in the swirling flow near a disc valve.The cone captures the full stream and the straightener conditions it before measurement.

Air bypass around the measuring device understates terminal flow.A compliant perimeter gasket seals against the surrounding ceiling or wall surface.

Large capture hoods are awkward around closely spaced ceiling services.The compact circular cone reaches small valves with less clearance.

Supply and extract checks may otherwise require different setups.Bidirectional sensing reports both flow directions through the same cone.

Permohonan yang biasa

Circular ceiling air-valve balancingCleanroom supply terminal verificationExtract valve flow checksSmall grille commissioningRoutine ventilation maintenance

Parameter teknikal

Representative compact valve-flow device dimensions are listed below; cone diameter, handle reach and measurement range can be selected for terminal size.

Bahan Teras	Molded engineering-polymer cone, elastomer perimeter seal and differential-pressure sensing grid
Ketebalan Panel	Typically 2.5-4.0 mm for the molded cone wall
Lebar berkesan	Approximately 250-350 mm across the capture mouth
Panjang maksimum	Approximately 400-550 mm including handle and display
Keluli Menghadapi Ketebalan	Typically 0.5-0.8 mm for stainless sensing-grid elements
Ketumpatan teras	Approximately 1050-1200 kg/m³ for the engineered polymer cone
Kekonduksian Terma	Approximately 0.18-0.25 W/(m·K) for the engineered polymer housing
Kemasan permukaan	Matte white capture cone with graphite handle, black seal and blue-gray display
Jenis Bersatu	Detachable meter coupling with sealed cone-to-grid interface and soft valve-face gasket
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Multiple cone mouth diametersSupply/extract bidirectional meterTelescopic support handleWireless displayProtective transport bagTraceable calibration service

Planning a Air Valve Flow Measurement Device specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami