Air valve flow measurement device in three-quarter full view

Instrumen pengujian dan validasi ruang bersih

Perangkat Pengukuran Aliran Katup Udara Air Valve

A compact cone-type airflow measurement device for direct supply and extract volume-flow checks at circular disc valves and small ventilation terminals.

Full-flow capture at circular air valves.
Integrated straightener controls swirl effects.
Compact bidirectional direct-flow display.

Permintaan untuk kutipan Browse Produk

Perkenalan produk

This device seals a shaped low-resistance cone around a circular air valve and guides the full stream through an integrated flow straightener and sensing grid. The detachable digital meter displays supply or extract volume flow without requiring a separate area calculation. Its compact mouth is easier to position on small ceiling and wall terminals than a full-size capture hood.

Fitur utama:

Shaped cone captures the complete flow from a circular air valve.

Integrated straightener reduces swirl-related measurement variation.

Reversible sensing supports supply and extract terminals.

Direct volume-flow display removes manual area conversion.

Soft perimeter seal limits bypass around the valve face.

Compact handheld format suits congested ceiling locations.

Kekhawatiran produk pelanggan

Circular air valves generate curved and swirling flow patterns that are difficult to quantify with a point sensor and often sit where a full-size hood cannot be positioned.

Point velocity readings are unreliable in the swirling flow near a disc valve.The cone captures the full stream and the straightener conditions it before measurement.

Air bypass around the measuring device understates terminal flow.A compliant perimeter gasket seals against the surrounding ceiling or wall surface.

Large capture hoods are awkward around closely spaced ceiling services.The compact circular cone reaches small valves with less clearance.

Supply and extract checks may otherwise require different setups.Bidirectional sensing reports both flow directions through the same cone.

Aplikasi yang Tipis

Circular ceiling air-valve balancingCleanroom supply terminal verificationExtract valve flow checksSmall grille commissioningRoutine ventilation maintenance

Parameter teknis

Representative compact valve-flow device dimensions are listed below; cone diameter, handle reach and measurement range can be selected for terminal size.

Bahan inti	Molded engineering-polymer cone, elastomer perimeter seal and differential-pressure sensing grid
Ketebalan Panel (Panel Thickness)	Typically 2.5-4.0 mm for the molded cone wall
Efektif lebar	Approximately 250-350 mm across the capture mouth
Panjang maksimum	Approximately 400-550 mm including handle and display
Baja menghadap ketebalan	Typically 0.5-0.8 mm for stainless sensing-grid elements
Kepadatan inti (core density)	Approximately 1050-1200 kg/m³ for the engineered polymer cone
Konduktivitas Termal (Thermal Conductivity)	Approximately 0.18-0.25 W/(m·K) for the engineered polymer housing
Permukaan selesai	Matte white capture cone with graphite handle, black seal and blue-gray display
Jenis Bersama	Detachable meter coupling with sealed cone-to-grid interface and soft valve-face gasket
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Multiple cone mouth diametersSupply/extract bidirectional meterTelescopic support handleWireless displayProtective transport bagTraceable calibration service

Planning a Air Valve Flow Measurement Device specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami