English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
غرف الأبحاث معدات قطع الغيار
Air دش تحكم
A compact programmable controller that sequences air shower doors, sensors, blower timing and operator status indications.
- Timed Shower Sequence
- Door Interlock Logic
- Sensor Input Control
- Clear Status Interface
مقدمة المنتج
The air shower controller coordinates the entry cycle between door sensors, electromagnetic locks, the circulation blower and user indicators. A sealed front interface provides cycle status and basic adjustment without exposing internal wiring. The enclosure protects the control electronics from routine cleaning and airborne dust. Replacement selection should match supply voltage, input type, relay load, door sequence and cabinet mounting space.
الخصائص الرئيسية
Interlock outputs prevent opposing doors from being released at the same time.
Dedicated sensor inputs respond to occupancy and door-position signals.
A simple display, colored controls and status lamps aid operation and fault tracing.
مخاوف المنتج للعملاء
A controller must coordinate doors and airflow reliably while remaining compatible with the existing sensors, locks and blower circuit.
Uncoordinated door releases can break the controlled entry sequence.Interlock logic holds the opposite door until the configured stage is complete.
Inconsistent blower timing produces variable cleaning cycles.Adjustable timer settings provide repeatable blower run and delay periods.
Different sensor signal types prevent direct replacement.Input configuration is matched to the installed occupancy and door-position devices.
Poor status visibility makes faults difficult to diagnose.The display and separate colored indicators communicate operating and attention states.
تطبيقات نموذجية
Personnel air showersMaterial air showersCleanroom entry interlocksAir shower refurbishment and control upgrades
المعلمات الفنية
Typical enclosure and construction ranges for air shower sequence controllers are shown below.
| المواد الأساسية | Flame-retardant ABS enclosure with electronic control PCB and relay outputs |
|---|---|
| سمك اللوحة | 45-90 mm nominal controller enclosure depth |
| العرض الفعال | 120-220 mm nominal front-panel width |
| الحد الأقصى الطول | Up to 280 mm overall enclosure height |
| الصلب يواجه سمك | 1.0-1.5 mm optional stainless-steel mounting plate |
| الكثافة الأساسية | 1030-1200 kg/m³ for ABS enclosure material |
| الموصلية الحرارية | 0.17-0.25 W/(m·K) for ABS enclosure material |
| إنهاء السطح | Smooth off-white molded enclosure with dark display bezel and colored controls |
| نوع المشترك | Screw-secured gasketed cover with bottom cable gland and internal terminal connections |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Matched supply voltageCustom shower-cycle timingSingle- or double-door logicAlternative sensor and lock interfaces
Planning a Air Shower Controller specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
