Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Equipment Ersatzteile
Air Shower Controller
A compact programmable controller that sequences air shower doors, sensors, blower timing and operator status indications.
- Timed Shower Sequence
- Door Interlock Logic
- Sensor Input Control
- Clear Status Interface
Produkteinführung
The air shower controller coordinates the entry cycle between door sensors, electromagnetic locks, the circulation blower and user indicators. A sealed front interface provides cycle status and basic adjustment without exposing internal wiring. The enclosure protects the control electronics from routine cleaning and airborne dust. Replacement selection should match supply voltage, input type, relay load, door sequence and cabinet mounting space.
Key Features
Interlock outputs prevent opposing doors from being released at the same time.
Dedicated sensor inputs respond to occupancy and door-position signals.
A simple display, colored controls and status lamps aid operation and fault tracing.
Kunden Produktbedenken
A controller must coordinate doors and airflow reliably while remaining compatible with the existing sensors, locks and blower circuit.
Uncoordinated door releases can break the controlled entry sequence.Interlock logic holds the opposite door until the configured stage is complete.
Inconsistent blower timing produces variable cleaning cycles.Adjustable timer settings provide repeatable blower run and delay periods.
Different sensor signal types prevent direct replacement.Input configuration is matched to the installed occupancy and door-position devices.
Poor status visibility makes faults difficult to diagnose.The display and separate colored indicators communicate operating and attention states.
Typische Anwendungen
Personnel air showersMaterial air showersCleanroom entry interlocksAir shower refurbishment and control upgrades
Technische Parameter
Typical enclosure and construction ranges for air shower sequence controllers are shown below.
| Core Material | Flame-retardant ABS enclosure with electronic control PCB and relay outputs |
|---|---|
| Panel Dicke | 45-90 mm nominal controller enclosure depth |
| Effektive Breite | 120-220 mm nominal front-panel width |
| Maximale Länge | Up to 280 mm overall enclosure height |
| Stahl facing Dicke | 1.0-1.5 mm optional stainless-steel mounting plate |
| Kerndichte | 1030-1200 kg/m³ for ABS enclosure material |
| Thermische Leitfähigkeit | 0.17-0.25 W/(m·K) for ABS enclosure material |
| Oberfläche Finish | Smooth off-white molded enclosure with dark display bezel and colored controls |
| Gemeinsamer Typ | Screw-secured gasketed cover with bottom cable gland and internal terminal connections |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Matched supply voltageCustom shower-cycle timingSingle- or double-door logicAlternative sensor and lock interfaces
Planning a Air Shower Controller specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
