Three-quarter view of a compact cleanroom air shower controller

クリーンルーム機器のスペアパーツ

Air シャワーコントローラー

A compact programmable controller that sequences air shower doors, sensors, blower timing and operator status indications.

Timed Shower Sequence
Door Interlock Logic
Sensor Input Control
Clear Status Interface

見積もりリクエスト製品案内

商品紹介

The air shower controller coordinates the entry cycle between door sensors, electromagnetic locks, the circulation blower and user indicators. A sealed front interface provides cycle status and basic adjustment without exposing internal wiring. The enclosure protects the control electronics from routine cleaning and airborne dust. Replacement selection should match supply voltage, input type, relay load, door sequence and cabinet mounting space.

主要な特徴

Programmable timing supports repeatable purge cycles for different entry procedures.

Interlock outputs prevent opposing doors from being released at the same time.

Dedicated sensor inputs respond to occupancy and door-position signals.

A simple display, colored controls and status lamps aid operation and fault tracing.

お客様の製品に関する懸念事項

A controller must coordinate doors and airflow reliably while remaining compatible with the existing sensors, locks and blower circuit.

Uncoordinated door releases can break the controlled entry sequence.Interlock logic holds the opposite door until the configured stage is complete.

Inconsistent blower timing produces variable cleaning cycles.Adjustable timer settings provide repeatable blower run and delay periods.

Different sensor signal types prevent direct replacement.Input configuration is matched to the installed occupancy and door-position devices.

Poor status visibility makes faults difficult to diagnose.The display and separate colored indicators communicate operating and attention states.

典型的な用途

Personnel air showersMaterial air showersCleanroom entry interlocksAir shower refurbishment and control upgrades

技術的なパラメータ

Typical enclosure and construction ranges for air shower sequence controllers are shown below.

コア材料	Flame-retardant ABS enclosure with electronic control PCB and relay outputs
パネルの厚さ	45-90 mm nominal controller enclosure depth
有効幅	120-220 mm nominal front-panel width
最大長さ	Up to 280 mm overall enclosure height
鋼鉄の厚さを直面する	1.0-1.5 mm optional stainless-steel mounting plate
コア密度	1030-1200 kg/m³ for ABS enclosure material
熱伝導率	0.17-0.25 W/(m·K) for ABS enclosure material
表面仕上げ	Smooth off-white molded enclosure with dark display bezel and colored controls
ジョイントタイプ	Screw-secured gasketed cover with bottom cable gland and internal terminal connections
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Matched supply voltageCustom shower-cycle timingSingle- or double-door logicAlternative sensor and lock interfaces

Planning a Air Shower Controller specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する