English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Запчасти для оборудования для чистых помещений
Контроллер воздушного душа
A compact programmable controller that sequences air shower doors, sensors, blower timing and operator status indications.
- Timed Shower Sequence
- Door Interlock Logic
- Sensor Input Control
- Clear Status Interface
Введение продукции
The air shower controller coordinates the entry cycle between door sensors, electromagnetic locks, the circulation blower and user indicators. A sealed front interface provides cycle status and basic adjustment without exposing internal wiring. The enclosure protects the control electronics from routine cleaning and airborne dust. Replacement selection should match supply voltage, input type, relay load, door sequence and cabinet mounting space.
Основные характеристики
Interlock outputs prevent opposing doors from being released at the same time.
Dedicated sensor inputs respond to occupancy and door-position signals.
A simple display, colored controls and status lamps aid operation and fault tracing.
Обеспокоенность клиентов продуктами
A controller must coordinate doors and airflow reliably while remaining compatible with the existing sensors, locks and blower circuit.
Uncoordinated door releases can break the controlled entry sequence.Interlock logic holds the opposite door until the configured stage is complete.
Inconsistent blower timing produces variable cleaning cycles.Adjustable timer settings provide repeatable blower run and delay periods.
Different sensor signal types prevent direct replacement.Input configuration is matched to the installed occupancy and door-position devices.
Poor status visibility makes faults difficult to diagnose.The display and separate colored indicators communicate operating and attention states.
Типичные приложения
Personnel air showersMaterial air showersCleanroom entry interlocksAir shower refurbishment and control upgrades
Технические параметры
Typical enclosure and construction ranges for air shower sequence controllers are shown below.
| Основной материал | Flame-retardant ABS enclosure with electronic control PCB and relay outputs |
|---|---|
| Толщина панели | 45-90 mm nominal controller enclosure depth |
| эффективная ширина | 120-220 mm nominal front-panel width |
| Максимальная длина | Up to 280 mm overall enclosure height |
| Толщина линий стали | 1.0-1.5 mm optional stainless-steel mounting plate |
| Плотность ядра | 1030 - 1200 кг / м3 для материала корпуса АБС |
| Теплопроводимость | 0,17 - 0,25 Вт / (м · К) для материала корпуса АБС |
| Поверхностная отделка | Smooth off-white molded enclosure with dark display bezel and colored controls |
| Объединенный тип | Screw-secured gasketed cover with bottom cable gland and internal terminal connections |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Matched supply voltageCustom shower-cycle timingSingle- or double-door logicAlternative sensor and lock interfaces
Planning a Air Shower Controller specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
