Three-quarter view of a compact cleanroom air shower controller

클린룸 장비 예비 부품

에어쇼어 컨트롤러

A compact programmable controller that sequences air shower doors, sensors, blower timing and operator status indications.

Timed Shower Sequence
Door Interlock Logic
Sensor Input Control
Clear Status Interface

견적 요청 제품 찾아보기

상품 소개

The air shower controller coordinates the entry cycle between door sensors, electromagnetic locks, the circulation blower and user indicators. A sealed front interface provides cycle status and basic adjustment without exposing internal wiring. The enclosure protects the control electronics from routine cleaning and airborne dust. Replacement selection should match supply voltage, input type, relay load, door sequence and cabinet mounting space.

주요 기능

Programmable timing supports repeatable purge cycles for different entry procedures.

Interlock outputs prevent opposing doors from being released at the same time.

Dedicated sensor inputs respond to occupancy and door-position signals.

A simple display, colored controls and status lamps aid operation and fault tracing.

고객 제품 관심사

A controller must coordinate doors and airflow reliably while remaining compatible with the existing sensors, locks and blower circuit.

Uncoordinated door releases can break the controlled entry sequence.Interlock logic holds the opposite door until the configured stage is complete.

Inconsistent blower timing produces variable cleaning cycles.Adjustable timer settings provide repeatable blower run and delay periods.

Different sensor signal types prevent direct replacement.Input configuration is matched to the installed occupancy and door-position devices.

Poor status visibility makes faults difficult to diagnose.The display and separate colored indicators communicate operating and attention states.

일반적인 응용 프로그램

Personnel air showersMaterial air showersCleanroom entry interlocksAir shower refurbishment and control upgrades

기술 매개변수

Typical enclosure and construction ranges for air shower sequence controllers are shown below.

핵심 재료	Flame-retardant ABS enclosure with electronic control PCB and relay outputs
패널 두께	45-90 mm nominal controller enclosure depth
유효 폭	120-220 mm nominal front-panel width
최대 길이	Up to 280 mm overall enclosure height
강철 면면 두께	1.0-1.5 mm optional stainless-steel mounting plate
코어 밀도	1030-1200 kg/m³ for ABS enclosure material
열전도도 (Thermal Conductivity)	0.17-0.25 W/(m·K) for ABS enclosure material
표면 마무리	Smooth off-white molded enclosure with dark display bezel and colored controls
접합 유형	Screw-secured gasketed cover with bottom cable gland and internal terminal connections
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Matched supply voltageCustom shower-cycle timingSingle- or double-door logicAlternative sensor and lock interfaces

Planning a Air Shower Controller specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.