Temiz Oda Ekipmanları ve Aseptik Tesis Temelleri için Tek Duraklı TedarikçinizUluslararası Proje Destekleri
Open mobile navigationClose mobile navigation
Ana Sayfa / Ürünler / Personel ve Malzeme Dekontaminasyon Ekipmanları / Walk-Through Cleanroom Air Shower Tunnel
Personel ve Malzeme Dekontaminasyon Ekipmanları

Temiz Oda Hava Duş Tüneli

An extended modular passage that exposes walking personnel to successive filtered-air jet zones, reducing queues at high-volume cleanroom entrances.
  • Continuous Walking Route
  • Sequential Cleaning Bays
  • Scalable Tunnel Length
  • Shift-Change Throughput
Alıntı isteği Browse ürünleri

Ürün tanıtımı

The tunnel arranges a sequence of cleaning bays so operators continue walking while receiving repeated directional airflow. Each bay can contain its own blower, filter, nozzle wall and low-level return route, helping maintain coverage through the complete passage. Modular sections allow the cleaning distance to suit planned walking speed and entry volume.

Ana Özellikler

Successive nozzle bays extend cleaning exposure along the walking route.

Dedicated fan-filter modules avoid a long common pressure path.

Low-level returns run continuously along the tunnel to remove released particles.

Panelised bay sections make it possible to extend the passage in stages.

One-way indicators can support orderly high-volume personnel flow.

Müşteri Ürün Sorunları

A continuous system must give personnel sufficient exposure time without allowing cleaning airflow to decay at the far end of the route.

Fast walkers receive too little cleaning exposure.Tunnel length and active-zone count can be selected for the planned walking speed.
A central blower loses pressure over a long passage.Each bay uses a short dedicated pressure loop with its own fan and final filter.
Released dust travels toward the clean exit with continuous traffic.Distributed returns remove contamination within each cleaning bay.
A long enclosure is difficult to bring into an existing building.Panelised modules can be transported separately and joined at the installation location.

Tipik uygulamalar

Semiconductor shift entryLarge electronics plantsPharmaceutical campus gowningHigh-volume food hygiene entrances

Teknik parametreler

Common modular construction ranges for a walk-through personnel tunnel are listed below.

Temel malzemelerRepeated powder-coated steel cleaning bays with centrifugal fans, H13 HEPA filters and adjustable stainless nozzles
Panel kalınlığı50 mm insulated modular wall sections
Effective Width (Etkili Genişlik)900-1500 mm clear walking passage width
Maksimum uzunlukUp to 10000 mm assembled tunnel length using repeated modules
Çelik yüz yüze kalınlığı1.0-1.2 mm formed steel facing with reinforced module junctions
Core Density (Çekirdek Yoğunluğu)45-65 kg/m³ composite insulation and acoustic infill
Termal İletkenlik0.029-0.038 W/(m·K) for the selected modular panel core
Yüzey bitirmeContinuous white cleanroom powder coating with stainless wear trim
Ortak tipGasketed bolted tunnel-bay joints with aligned nozzle plenums and sealed return channels
Customization (Özelleşme)Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Two to ten cleaning modulesContinuous or zoned fan operationOne-way traffic indicatorsEmergency side-exit modules

Planning a Walk-Through Cleanroom Air Shower Tunnel specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun
E-posta Bize whatsapp WeChat

Ana Sayfa

Ürünler

Haberler

Hakkımızda

İletişim