Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Personal und Material Dekontamination Ausrüstung
Walk-Through - Cleanroom-Air - Duschtunnel
An extended modular passage that exposes walking personnel to successive filtered-air jet zones, reducing queues at high-volume cleanroom entrances.
- Continuous Walking Route
- Sequential Cleaning Bays
- Scalable Tunnel Length
- Shift-Change Throughput
Produkteinführung
The tunnel arranges a sequence of cleaning bays so operators continue walking while receiving repeated directional airflow. Each bay can contain its own blower, filter, nozzle wall and low-level return route, helping maintain coverage through the complete passage. Modular sections allow the cleaning distance to suit planned walking speed and entry volume.
Key Features
Dedicated fan-filter modules avoid a long common pressure path.
Low-level returns run continuously along the tunnel to remove released particles.
Panelised bay sections make it possible to extend the passage in stages.
One-way indicators can support orderly high-volume personnel flow.
Kunden Produktbedenken
A continuous system must give personnel sufficient exposure time without allowing cleaning airflow to decay at the far end of the route.
Fast walkers receive too little cleaning exposure.Tunnel length and active-zone count can be selected for the planned walking speed.
A central blower loses pressure over a long passage.Each bay uses a short dedicated pressure loop with its own fan and final filter.
Released dust travels toward the clean exit with continuous traffic.Distributed returns remove contamination within each cleaning bay.
A long enclosure is difficult to bring into an existing building.Panelised modules can be transported separately and joined at the installation location.
Typische Anwendungen
Semiconductor shift entryLarge electronics plantsPharmaceutical campus gowningHigh-volume food hygiene entrances
Technische Parameter
Common modular construction ranges for a walk-through personnel tunnel are listed below.
| Core Material | Repeated powder-coated steel cleaning bays with centrifugal fans, H13 HEPA filters and adjustable stainless nozzles |
|---|---|
| Panel Dicke | 50 mm insulated modular wall sections |
| Effektive Breite | 900-1500 mm clear walking passage width |
| Maximale Länge | Up to 10000 mm assembled tunnel length using repeated modules |
| Stahl facing Dicke | 1.0-1.2 mm formed steel facing with reinforced module junctions |
| Kerndichte | 45-65 kg/m³ composite insulation and acoustic infill |
| Thermische Leitfähigkeit | 0.029-0.038 W/(m·K) for the selected modular panel core |
| Oberfläche Finish | Continuous white cleanroom powder coating with stainless wear trim |
| Gemeinsamer Typ | Gasketed bolted tunnel-bay joints with aligned nozzle plenums and sealed return channels |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Two to ten cleaning modulesContinuous or zoned fan operationOne-way traffic indicatorsEmergency side-exit modules
Planning a Walk-Through Cleanroom Air Shower Tunnel specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
