Pemasok One-Stop Anda untuk Peralatan Cleanroom dan Fasilitas Aseptik EsensialDukungan proyek internasional
Open mobile navigationClose mobile navigation
Beranda / Produk / Peralatan Dekontaminasi Personil dan Bahan / Walk-Through Cleanroom Air Shower Tunnel
Peralatan Dekontaminasi Personil dan Bahan

Walk-Through Cleanroom Air Shower Tunnel (Towongan Mandi Udara)

An extended modular passage that exposes walking personnel to successive filtered-air jet zones, reducing queues at high-volume cleanroom entrances.
  • Continuous Walking Route
  • Sequential Cleaning Bays
  • Scalable Tunnel Length
  • Shift-Change Throughput
Permintaan untuk kutipan Browse Produk

Perkenalan produk

The tunnel arranges a sequence of cleaning bays so operators continue walking while receiving repeated directional airflow. Each bay can contain its own blower, filter, nozzle wall and low-level return route, helping maintain coverage through the complete passage. Modular sections allow the cleaning distance to suit planned walking speed and entry volume.

Fitur utama:

Successive nozzle bays extend cleaning exposure along the walking route.

Dedicated fan-filter modules avoid a long common pressure path.

Low-level returns run continuously along the tunnel to remove released particles.

Panelised bay sections make it possible to extend the passage in stages.

One-way indicators can support orderly high-volume personnel flow.

Kekhawatiran produk pelanggan

A continuous system must give personnel sufficient exposure time without allowing cleaning airflow to decay at the far end of the route.

Fast walkers receive too little cleaning exposure.Tunnel length and active-zone count can be selected for the planned walking speed.
A central blower loses pressure over a long passage.Each bay uses a short dedicated pressure loop with its own fan and final filter.
Released dust travels toward the clean exit with continuous traffic.Distributed returns remove contamination within each cleaning bay.
A long enclosure is difficult to bring into an existing building.Panelised modules can be transported separately and joined at the installation location.

Aplikasi yang Tipis

Semiconductor shift entryLarge electronics plantsPharmaceutical campus gowningHigh-volume food hygiene entrances

Parameter teknis

Common modular construction ranges for a walk-through personnel tunnel are listed below.

Bahan intiRepeated powder-coated steel cleaning bays with centrifugal fans, H13 HEPA filters and adjustable stainless nozzles
Ketebalan Panel (Panel Thickness)50 mm insulated modular wall sections
Efektif lebar900-1500 mm clear walking passage width
Panjang maksimumUp to 10000 mm assembled tunnel length using repeated modules
Baja menghadap ketebalan1.0-1.2 mm formed steel facing with reinforced module junctions
Kepadatan inti (core density)45-65 kg/m³ composite insulation and acoustic infill
Konduktivitas Termal (Thermal Conductivity)0.029-0.038 W/(m·K) for the selected modular panel core
Permukaan selesaiContinuous white cleanroom powder coating with stainless wear trim
Jenis BersamaGasketed bolted tunnel-bay joints with aligned nozzle plenums and sealed return channels
Customization (Kustomisasi)Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Two to ten cleaning modulesContinuous or zoned fan operationOne-way traffic indicatorsEmergency side-exit modules

Planning a Walk-Through Cleanroom Air Shower Tunnel specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami
Email Kami WhatsApp WhatsApp WhatsApp WhatsApp WeChat adalah

Beranda

Produk

Berita

Tentang Kami

Hubungi Kami