Welded stainless steel cleanroom air duct with polished rectangular body

Temiz Oda Hava Dağıtım Sistemleri

Paslanmaz çelik kaynaklı hava boru hattı

A TIG-welded 304L or 316L stainless-steel duct system for hygienic supply air and corrosive exhaust routes that require smooth, cleanable surfaces.

304L or 316L Construction
Continuous Welded Seams
Smooth Passivated Interior
Hygienic Cleanable Surface

Alıntı isteği Browse ürünleri

Ürün tanıtımı

Welded stainless steel ductwork is used where ordinary zinc-coated sheet is unsuitable for repeated cleaning, humid service or aggressive exhaust. Straight sections and fittings are fabricated from 304L or 316L sheet with continuous TIG-welded longitudinal seams; weld discoloration is removed and the surface is passivated or mechanically finished. Flanged transverse joints can use compatible closed-cell gaskets, or sections can be field welded when a continuous metal air path is required. The rigid smooth construction is well suited to pharmaceutical exhaust, washdown areas and corrosive process extraction.

Ana Özellikler

Low-carbon 304L or molybdenum-bearing 316L grades support hygienic cleaning and corrosion control.

Continuous TIG-welded seams eliminate folded crevices along the duct length.

Pickled and passivated weld zones restore a uniform corrosion-resistant surface.

Stainless flanges and fasteners prevent mixed-metal staining around serviceable joints.

Müşteri Ürün Sorunları

A hygienic exhaust route must resist its conveyed atmosphere while avoiding lap seams and incompatible hardware that trap residue or initiate corrosion.

Condensate and cleaning chemicals attack galvanized surfaces.The selected 304L or 316L alloy provides a stainless wetted surface matched to the exposure.

Folded longitudinal seams retain residue in a hygiene-sensitive exhaust line.Continuous butt or lap welding creates a closed seam that can be smoothed and passivated.

Heat tint around a weld becomes an early corrosion site.Post-weld cleaning removes oxide scale before the finished section enters service.

Carbon-steel fasteners leave rust marks on stainless ductwork.Compatible stainless hardware and isolated supports preserve the external finish.

Tipik uygulamalar

Pharmaceutical process exhaustCleanroom washdown areasLaboratory fume extractionHigh-humidity air systemsFood and biotechnology ventilation

Teknik parametreler

Representative manufacturing ranges for welded stainless steel cleanroom ductwork are shown below.

Temel malzemeler	AISI 304L or AISI 316L stainless steel
Panel kalınlığı	0.8–1.5 mm welded sheet construction
Effective Width (Etkili Genişlik)	100–1500 mm rectangular width or 100–800 mm round diameter
Maksimum uzunluk	1200–1500 mm per fabricated straight section
Çelik yüz yüze kalınlığı	0.8–1.5 mm stainless steel wall
Core Density (Çekirdek Yoğunluğu)	Approximately 7900–8000 kg/m³ solid stainless steel
Termal İletkenlik	Approximately 15–16 W/(m·K) at room temperature for 304L/316L stainless steel
Yüzey bitirme	2B, brushed or mechanically polished finish with cleaned and passivated welds
Ortak tip	Welded joint or stainless flange with chemically compatible closed-cell gasket
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

304L or 316L stainless gradeRectangular or round constructionBrushed, 2B or polished finishWelded or gasketed flanged transverse joints

Planning a Stainless Steel Welded Air Duct specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun