Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Luftverteilungssysteme
Edelstahl geschweißter Luftkanal
A TIG-welded 304L or 316L stainless-steel duct system for hygienic supply air and corrosive exhaust routes that require smooth, cleanable surfaces.
- 304L or 316L Construction
- Continuous Welded Seams
- Smooth Passivated Interior
- Hygienic Cleanable Surface
Produkteinführung
Welded stainless steel ductwork is used where ordinary zinc-coated sheet is unsuitable for repeated cleaning, humid service or aggressive exhaust. Straight sections and fittings are fabricated from 304L or 316L sheet with continuous TIG-welded longitudinal seams; weld discoloration is removed and the surface is passivated or mechanically finished. Flanged transverse joints can use compatible closed-cell gaskets, or sections can be field welded when a continuous metal air path is required. The rigid smooth construction is well suited to pharmaceutical exhaust, washdown areas and corrosive process extraction.
Key Features
Continuous TIG-welded seams eliminate folded crevices along the duct length.
Pickled and passivated weld zones restore a uniform corrosion-resistant surface.
Stainless flanges and fasteners prevent mixed-metal staining around serviceable joints.
Kunden Produktbedenken
A hygienic exhaust route must resist its conveyed atmosphere while avoiding lap seams and incompatible hardware that trap residue or initiate corrosion.
Condensate and cleaning chemicals attack galvanized surfaces.The selected 304L or 316L alloy provides a stainless wetted surface matched to the exposure.
Folded longitudinal seams retain residue in a hygiene-sensitive exhaust line.Continuous butt or lap welding creates a closed seam that can be smoothed and passivated.
Heat tint around a weld becomes an early corrosion site.Post-weld cleaning removes oxide scale before the finished section enters service.
Carbon-steel fasteners leave rust marks on stainless ductwork.Compatible stainless hardware and isolated supports preserve the external finish.
Typische Anwendungen
Pharmaceutical process exhaustCleanroom washdown areasLaboratory fume extractionHigh-humidity air systemsFood and biotechnology ventilation
Technische Parameter
Representative manufacturing ranges for welded stainless steel cleanroom ductwork are shown below.
| Core Material | AISI 304L or AISI 316L stainless steel |
|---|---|
| Panel Dicke | 0.8–1.5 mm welded sheet construction |
| Effektive Breite | 100–1500 mm rectangular width or 100–800 mm round diameter |
| Maximale Länge | 1200–1500 mm per fabricated straight section |
| Stahl facing Dicke | 0.8–1.5 mm stainless steel wall |
| Kerndichte | Approximately 7900–8000 kg/m³ solid stainless steel |
| Thermische Leitfähigkeit | Approximately 15–16 W/(m·K) at room temperature for 304L/316L stainless steel |
| Oberfläche Finish | 2B, brushed or mechanically polished finish with cleaned and passivated welds |
| Gemeinsamer Typ | Welded joint or stainless flange with chemically compatible closed-cell gasket |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
304L or 316L stainless gradeRectangular or round constructionBrushed, 2B or polished finishWelded or gasketed flanged transverse joints
Planning a Stainless Steel Welded Air Duct specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
