Welded stainless steel cleanroom air duct with polished rectangular body

Системы распределения воздуха в чистых помещениях

Сварный воздухопровод из нержавеющей стали

A TIG-welded 304L or 316L stainless-steel duct system for hygienic supply air and corrosive exhaust routes that require smooth, cleanable surfaces.

304L or 316L Construction
Continuous Welded Seams
Smooth Passivated Interior
Hygienic Cleanable Surface

Запрос котировки Просмотреть продукты

Введение продукции

Welded stainless steel ductwork is used where ordinary zinc-coated sheet is unsuitable for repeated cleaning, humid service or aggressive exhaust. Straight sections and fittings are fabricated from 304L or 316L sheet with continuous TIG-welded longitudinal seams; weld discoloration is removed and the surface is passivated or mechanically finished. Flanged transverse joints can use compatible closed-cell gaskets, or sections can be field welded when a continuous metal air path is required. The rigid smooth construction is well suited to pharmaceutical exhaust, washdown areas and corrosive process extraction.

Основные характеристики

Low-carbon 304L or molybdenum-bearing 316L grades support hygienic cleaning and corrosion control.

Continuous TIG-welded seams eliminate folded crevices along the duct length.

Pickled and passivated weld zones restore a uniform corrosion-resistant surface.

Stainless flanges and fasteners prevent mixed-metal staining around serviceable joints.

Обеспокоенность клиентов продуктами

A hygienic exhaust route must resist its conveyed atmosphere while avoiding lap seams and incompatible hardware that trap residue or initiate corrosion.

Condensate and cleaning chemicals attack galvanized surfaces.The selected 304L or 316L alloy provides a stainless wetted surface matched to the exposure.

Folded longitudinal seams retain residue in a hygiene-sensitive exhaust line.Continuous butt or lap welding creates a closed seam that can be smoothed and passivated.

Heat tint around a weld becomes an early corrosion site.Post-weld cleaning removes oxide scale before the finished section enters service.

Carbon-steel fasteners leave rust marks on stainless ductwork.Compatible stainless hardware and isolated supports preserve the external finish.

Типичные приложения

Pharmaceutical process exhaustCleanroom washdown areasLaboratory fume extractionHigh-humidity air systemsFood and biotechnology ventilation

Технические параметры

Representative manufacturing ranges for welded stainless steel cleanroom ductwork are shown below.

Основной материал	AISI 304L or AISI 316L stainless steel
Толщина панели	0.8–1.5 mm welded sheet construction
эффективная ширина	100–1500 mm rectangular width or 100–800 mm round diameter
Максимальная длина	1200–1500 mm per fabricated straight section
Толщина линий стали	0.8–1.5 mm stainless steel wall
Плотность ядра	Approximately 7900–8000 kg/m³ solid stainless steel
Теплопроводимость	Approximately 15–16 W/(m·K) at room temperature for 304L/316L stainless steel
Поверхностная отделка	2B, brushed or mechanically polished finish with cleaned and passivated welds
Объединенный тип	Welded joint or stainless flange with chemically compatible closed-cell gasket
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

304L or 316L stainless gradeRectangular or round constructionBrushed, 2B or polished finishWelded or gasketed flanged transverse joints

Planning a Stainless Steel Welded Air Duct specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой