Welded stainless steel cleanroom air duct with polished rectangular body

Sistem Pengedaran Udara Bilik Bersih

Keluli tahan karat dikimpal saluran udara

A TIG-welded 304L or 316L stainless-steel duct system for hygienic supply air and corrosive exhaust routes that require smooth, cleanable surfaces.

304L or 316L Construction
Continuous Welded Seams
Smooth Passivated Interior
Hygienic Cleanable Surface

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

Welded stainless steel ductwork is used where ordinary zinc-coated sheet is unsuitable for repeated cleaning, humid service or aggressive exhaust. Straight sections and fittings are fabricated from 304L or 316L sheet with continuous TIG-welded longitudinal seams; weld discoloration is removed and the surface is passivated or mechanically finished. Flanged transverse joints can use compatible closed-cell gaskets, or sections can be field welded when a continuous metal air path is required. The rigid smooth construction is well suited to pharmaceutical exhaust, washdown areas and corrosive process extraction.

Ciri-ciri Utama

Low-carbon 304L or molybdenum-bearing 316L grades support hygienic cleaning and corrosion control.

Continuous TIG-welded seams eliminate folded crevices along the duct length.

Pickled and passivated weld zones restore a uniform corrosion-resistant surface.

Stainless flanges and fasteners prevent mixed-metal staining around serviceable joints.

Kebimbangan Produk Pelanggan

A hygienic exhaust route must resist its conveyed atmosphere while avoiding lap seams and incompatible hardware that trap residue or initiate corrosion.

Condensate and cleaning chemicals attack galvanized surfaces.The selected 304L or 316L alloy provides a stainless wetted surface matched to the exposure.

Folded longitudinal seams retain residue in a hygiene-sensitive exhaust line.Continuous butt or lap welding creates a closed seam that can be smoothed and passivated.

Heat tint around a weld becomes an early corrosion site.Post-weld cleaning removes oxide scale before the finished section enters service.

Carbon-steel fasteners leave rust marks on stainless ductwork.Compatible stainless hardware and isolated supports preserve the external finish.

Permohonan yang biasa

Pharmaceutical process exhaustCleanroom washdown areasLaboratory fume extractionHigh-humidity air systemsFood and biotechnology ventilation

Parameter teknikal

Representative manufacturing ranges for welded stainless steel cleanroom ductwork are shown below.

Bahan Teras	AISI 304L or AISI 316L stainless steel
Ketebalan Panel	0.8–1.5 mm welded sheet construction
Lebar berkesan	100–1500 mm rectangular width or 100–800 mm round diameter
Panjang maksimum	1200–1500 mm per fabricated straight section
Keluli Menghadapi Ketebalan	0.8–1.5 mm stainless steel wall
Ketumpatan teras	Approximately 7900–8000 kg/m³ solid stainless steel
Kekonduksian Terma	Approximately 15–16 W/(m·K) at room temperature for 304L/316L stainless steel
Kemasan permukaan	2B, brushed or mechanically polished finish with cleaned and passivated welds
Jenis Bersatu	Welded joint or stainless flange with chemically compatible closed-cell gasket
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

304L or 316L stainless gradeRectangular or round constructionBrushed, 2B or polished finishWelded or gasketed flanged transverse joints

Planning a Stainless Steel Welded Air Duct specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami