Welded stainless steel cleanroom air duct with polished rectangular body

클린룸 공기 분배 시스템

스테인레스 스틸 용접 공기 덕트

A TIG-welded 304L or 316L stainless-steel duct system for hygienic supply air and corrosive exhaust routes that require smooth, cleanable surfaces.

304L or 316L Construction
Continuous Welded Seams
Smooth Passivated Interior
Hygienic Cleanable Surface

견적 요청 제품 찾아보기

상품 소개

Welded stainless steel ductwork is used where ordinary zinc-coated sheet is unsuitable for repeated cleaning, humid service or aggressive exhaust. Straight sections and fittings are fabricated from 304L or 316L sheet with continuous TIG-welded longitudinal seams; weld discoloration is removed and the surface is passivated or mechanically finished. Flanged transverse joints can use compatible closed-cell gaskets, or sections can be field welded when a continuous metal air path is required. The rigid smooth construction is well suited to pharmaceutical exhaust, washdown areas and corrosive process extraction.

주요 기능

Low-carbon 304L or molybdenum-bearing 316L grades support hygienic cleaning and corrosion control.

Continuous TIG-welded seams eliminate folded crevices along the duct length.

Pickled and passivated weld zones restore a uniform corrosion-resistant surface.

Stainless flanges and fasteners prevent mixed-metal staining around serviceable joints.

고객 제품 관심사

A hygienic exhaust route must resist its conveyed atmosphere while avoiding lap seams and incompatible hardware that trap residue or initiate corrosion.

Condensate and cleaning chemicals attack galvanized surfaces.The selected 304L or 316L alloy provides a stainless wetted surface matched to the exposure.

Folded longitudinal seams retain residue in a hygiene-sensitive exhaust line.Continuous butt or lap welding creates a closed seam that can be smoothed and passivated.

Heat tint around a weld becomes an early corrosion site.Post-weld cleaning removes oxide scale before the finished section enters service.

Carbon-steel fasteners leave rust marks on stainless ductwork.Compatible stainless hardware and isolated supports preserve the external finish.

일반적인 응용 프로그램

Pharmaceutical process exhaustCleanroom washdown areasLaboratory fume extractionHigh-humidity air systemsFood and biotechnology ventilation

기술 매개변수

Representative manufacturing ranges for welded stainless steel cleanroom ductwork are shown below.

핵심 재료	AISI 304L or AISI 316L stainless steel
패널 두께	0.8–1.5 mm welded sheet construction
유효 폭	100–1500 mm rectangular width or 100–800 mm round diameter
최대 길이	1200–1500 mm per fabricated straight section
강철 면면 두께	0.8–1.5 mm stainless steel wall
코어 밀도	Approximately 7900–8000 kg/m³ solid stainless steel
열전도도 (Thermal Conductivity)	Approximately 15–16 W/(m·K) at room temperature for 304L/316L stainless steel
표면 마무리	2B, brushed or mechanically polished finish with cleaned and passivated welds
접합 유형	Welded joint or stainless flange with chemically compatible closed-cell gasket
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

304L or 316L stainless gradeRectangular or round constructionBrushed, 2B or polished finishWelded or gasketed flanged transverse joints

Planning a Stainless Steel Welded Air Duct specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.