İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Mobilyaları ve Paslanmaz Çelik Ürünleri
Paslanmaz Çelik Drain Masaları
A Type 304 stainless wet-work table with a shallow dished top, central waste, removable blue mesh screen, raised marine edge and adjustable open tubular frame.
- Shallow dished wet-work top
- Central 50 mm waste
- Removable blue mesh screen
- Raised marine perimeter edge
Ürün tanıtımı
The stainless steel drain table provides a large wet-working surface for parts that must drain without sitting inside a sink bowl. Its Type 304 top is cross-broken from four sides toward a central 50 mm waste, with a raised marine edge retaining incidental liquid. A removable blue polymer mesh screen covers the immediate drain zone while allowing tools to rest above runoff. The welded open frame uses adjustable stainless feet and a low three-bar drying shelf, leaving the waste trap visible beneath the top.
Ana Özellikler
The raised marine edge contains incidental liquid without creating a deep lifting obstruction around the table.
A removable blue mesh screen keeps parts above the waste and provides tool-free access to the strainer.
The open underframe exposes the trap and carries a low bar shelf that does not form a solid dust-catching surface.
Müşteri Ürün Sorunları
Wet parts need a large stable landing area that drains deliberately without the lifting depth of a sink or the standing water of a flat table.
A flat stainless worktop leaves puddles beneath rinsed components.The four-way dished surface continuously falls toward the center waste.
Small parts can cover the strainer and stop drainage.The raised blue mesh screen bridges the outlet while maintaining open flow paths.
Runoff reaches the floor when an item displaces water across an unbounded edge.The formed marine perimeter retains transient liquid on the draining surface.
An enclosed base hides a blocked trap and creates inaccessible wet surfaces.The open tubular frame leaves the complete waste and cleanout visible.
Tipik uygulamalar
Cleanroom wet parts inspectionPharmaceutical component drainingBiotechnology utensil dryingControlled washroom transfer pointsMedical-device rinse staging
Teknik parametreler
Typical configurable specifications for a stainless cleanroom drain table are listed below.
| Temel malzemeler | Type 304 stainless cross-broken drain top and tubular frame with removable blue polypropylene mesh screen |
|---|---|
| Panel kalınlığı | 1.5 mm 16-gauge dished top with reinforced underside |
| Effective Width (Etkili Genişlik) | 1500 mm overall wet-work width |
| Maksimum uzunluk | 750 mm maximum front-to-back table depth |
| Çelik yüz yüze kalınlığı | 1.5 mm Type 304 stainless top; 1.2 mm tubular frame wall |
| Core Density (Çekirdek Yoğunluğu) | 7900-8000 kg / m3 Tip 304 paslanmaz çelik için |
| Termal İletkenlik | Tip 304 paslanmaz çelik için 14-17 W / (m · K) |
| Yüzey bitirme | Satin-brushed drain top, passivated welds, blue removable mesh and brushed tubular frame |
| Ortak tip | Cross-broken top with welded marine edge, central 50 mm basket waste, open trap and adjustable leg sockets |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Type 316 stainless topMobile caster frameSolid or multi-bar undershelfSide-mounted hose bracket
Planning a Stainless Steel Drain Table specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
