Stainless cleanroom drain table with dished top and blue center mesh

クリーンルーム家具 · ステンレス製品

ステンレス鋼のドレインテーブル

A Type 304 stainless wet-work table with a shallow dished top, central waste, removable blue mesh screen, raised marine edge and adjustable open tubular frame.

Shallow dished wet-work top
Central 50 mm waste
Removable blue mesh screen
Raised marine perimeter edge

見積もりリクエスト製品案内

商品紹介

The stainless steel drain table provides a large wet-working surface for parts that must drain without sitting inside a sink bowl. Its Type 304 top is cross-broken from four sides toward a central 50 mm waste, with a raised marine edge retaining incidental liquid. A removable blue polymer mesh screen covers the immediate drain zone while allowing tools to rest above runoff. The welded open frame uses adjustable stainless feet and a low three-bar drying shelf, leaving the waste trap visible beneath the top.

主要な特徴

Four-way cross-breaking directs runoff from the broad work surface to one central outlet.

The raised marine edge contains incidental liquid without creating a deep lifting obstruction around the table.

A removable blue mesh screen keeps parts above the waste and provides tool-free access to the strainer.

The open underframe exposes the trap and carries a low bar shelf that does not form a solid dust-catching surface.

お客様の製品に関する懸念事項

Wet parts need a large stable landing area that drains deliberately without the lifting depth of a sink or the standing water of a flat table.

A flat stainless worktop leaves puddles beneath rinsed components.The four-way dished surface continuously falls toward the center waste.

Small parts can cover the strainer and stop drainage.The raised blue mesh screen bridges the outlet while maintaining open flow paths.

Runoff reaches the floor when an item displaces water across an unbounded edge.The formed marine perimeter retains transient liquid on the draining surface.

An enclosed base hides a blocked trap and creates inaccessible wet surfaces.The open tubular frame leaves the complete waste and cleanout visible.

典型的な用途

Cleanroom wet parts inspectionPharmaceutical component drainingBiotechnology utensil dryingControlled washroom transfer pointsMedical-device rinse staging

技術的なパラメータ

Typical configurable specifications for a stainless cleanroom drain table are listed below.

コア材料	Type 304 stainless cross-broken drain top and tubular frame with removable blue polypropylene mesh screen
パネルの厚さ	1.5 mm 16-gauge dished top with reinforced underside
有効幅	1500 mm overall wet-work width
最大長さ	750 mm maximum front-to-back table depth
鋼鉄の厚さを直面する	1.5 mm Type 304 stainless top; 1.2 mm tubular frame wall
コア密度	タイプ 304 のステンレス鋼のための 7900 — 8000 kg / m3
熱伝導率	タイプ 304 ステンレス鋼 14 〜 17 W / （m · K）
表面仕上げ	Satin-brushed drain top, passivated welds, blue removable mesh and brushed tubular frame
ジョイントタイプ	Cross-broken top with welded marine edge, central 50 mm basket waste, open trap and adjustable leg sockets
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Type 316 stainless topMobile caster frameSolid or multi-bar undershelfSide-mounted hose bracket

Planning a Stainless Steel Drain Table specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する