Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Meubles de salle blanche et produits en acier inoxydable
Z Acier inoxydable drain table
A Type 304 stainless wet-work table with a shallow dished top, central waste, removable blue mesh screen, raised marine edge and adjustable open tubular frame.
- Shallow dished wet-work top
- Central 50 mm waste
- Removable blue mesh screen
- Raised marine perimeter edge
Introduction de produit
The stainless steel drain table provides a large wet-working surface for parts that must drain without sitting inside a sink bowl. Its Type 304 top is cross-broken from four sides toward a central 50 mm waste, with a raised marine edge retaining incidental liquid. A removable blue polymer mesh screen covers the immediate drain zone while allowing tools to rest above runoff. The welded open frame uses adjustable stainless feet and a low three-bar drying shelf, leaving the waste trap visible beneath the top.
Key Features
The raised marine edge contains incidental liquid without creating a deep lifting obstruction around the table.
A removable blue mesh screen keeps parts above the waste and provides tool-free access to the strainer.
The open underframe exposes the trap and carries a low bar shelf that does not form a solid dust-catching surface.
Préoccupations du client produit
Wet parts need a large stable landing area that drains deliberately without the lifting depth of a sink or the standing water of a flat table.
A flat stainless worktop leaves puddles beneath rinsed components.The four-way dished surface continuously falls toward the center waste.
Small parts can cover the strainer and stop drainage.The raised blue mesh screen bridges the outlet while maintaining open flow paths.
Runoff reaches the floor when an item displaces water across an unbounded edge.The formed marine perimeter retains transient liquid on the draining surface.
An enclosed base hides a blocked trap and creates inaccessible wet surfaces.The open tubular frame leaves the complete waste and cleanout visible.
Les applications typiques
Cleanroom wet parts inspectionPharmaceutical component drainingBiotechnology utensil dryingControlled washroom transfer pointsMedical-device rinse staging
Paramètres techniques
Typical configurable specifications for a stainless cleanroom drain table are listed below.
| Matériaux de base | Type 304 stainless cross-broken drain top and tubular frame with removable blue polypropylene mesh screen |
|---|---|
| Panneau épaisseur | 1.5 mm 16-gauge dished top with reinforced underside |
| Largeur effective | 1500 mm overall wet-work width |
| Longueur maximale | 750 mm maximum front-to-back table depth |
| Acier face épaisseur | 1.5 mm Type 304 stainless top; 1.2 mm tubular frame wall |
| Densité Core | 7900 - 8000 kg / m3 pour l'acier inoxydable de type 304 |
| Conductivité thermique | 14 - 17 W / (m · K) pour l'acier inoxydable de type 304 |
| surface finie | Satin-brushed drain top, passivated welds, blue removable mesh and brushed tubular frame |
| Type joint | Cross-broken top with welded marine edge, central 50 mm basket waste, open trap and adjustable leg sockets |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Type 316 stainless topMobile caster frameSolid or multi-bar undershelfSide-mounted hose bracket
Planning a Stainless Steel Drain Table specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
