Stainless cleanroom drain table with dished top and blue center mesh

Мебель для чистых комнат и изделия из нержавеющей стали

Дренажный стол из нержавеющей стали

A Type 304 stainless wet-work table with a shallow dished top, central waste, removable blue mesh screen, raised marine edge and adjustable open tubular frame.

Shallow dished wet-work top
Central 50 mm waste
Removable blue mesh screen
Raised marine perimeter edge

Запрос котировки Просмотреть продукты

Введение продукции

The stainless steel drain table provides a large wet-working surface for parts that must drain without sitting inside a sink bowl. Its Type 304 top is cross-broken from four sides toward a central 50 mm waste, with a raised marine edge retaining incidental liquid. A removable blue polymer mesh screen covers the immediate drain zone while allowing tools to rest above runoff. The welded open frame uses adjustable stainless feet and a low three-bar drying shelf, leaving the waste trap visible beneath the top.

Основные характеристики

Four-way cross-breaking directs runoff from the broad work surface to one central outlet.

The raised marine edge contains incidental liquid without creating a deep lifting obstruction around the table.

A removable blue mesh screen keeps parts above the waste and provides tool-free access to the strainer.

The open underframe exposes the trap and carries a low bar shelf that does not form a solid dust-catching surface.

Обеспокоенность клиентов продуктами

Wet parts need a large stable landing area that drains deliberately without the lifting depth of a sink or the standing water of a flat table.

A flat stainless worktop leaves puddles beneath rinsed components.The four-way dished surface continuously falls toward the center waste.

Small parts can cover the strainer and stop drainage.The raised blue mesh screen bridges the outlet while maintaining open flow paths.

Runoff reaches the floor when an item displaces water across an unbounded edge.The formed marine perimeter retains transient liquid on the draining surface.

An enclosed base hides a blocked trap and creates inaccessible wet surfaces.The open tubular frame leaves the complete waste and cleanout visible.

Типичные приложения

Cleanroom wet parts inspectionPharmaceutical component drainingBiotechnology utensil dryingControlled washroom transfer pointsMedical-device rinse staging

Технические параметры

Typical configurable specifications for a stainless cleanroom drain table are listed below.

Основной материал	Type 304 stainless cross-broken drain top and tubular frame with removable blue polypropylene mesh screen
Толщина панели	1.5 mm 16-gauge dished top with reinforced underside
эффективная ширина	1500 mm overall wet-work width
Максимальная длина	750 mm maximum front-to-back table depth
Толщина линий стали	1.5 mm Type 304 stainless top; 1.2 mm tubular frame wall
Плотность ядра	7900–8000 kg/m³ for Type 304 stainless steel
Теплопроводимость	14–17 W/(m·K) for Type 304 stainless steel
Поверхностная отделка	Satin-brushed drain top, passivated welds, blue removable mesh and brushed tubular frame
Объединенный тип	Cross-broken top with welded marine edge, central 50 mm basket waste, open trap and adjustable leg sockets
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Type 316 stainless topMobile caster frameSolid or multi-bar undershelfSide-mounted hose bracket

Planning a Stainless Steel Drain Table specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой