Stainless cleanroom drain table with dished top and blue center mesh

클린룸 가구 및 스테인레스 스틸 제품

스테인레스 스틸 배수 테이블

A Type 304 stainless wet-work table with a shallow dished top, central waste, removable blue mesh screen, raised marine edge and adjustable open tubular frame.

Shallow dished wet-work top
Central 50 mm waste
Removable blue mesh screen
Raised marine perimeter edge

견적 요청 제품 찾아보기

상품 소개

The stainless steel drain table provides a large wet-working surface for parts that must drain without sitting inside a sink bowl. Its Type 304 top is cross-broken from four sides toward a central 50 mm waste, with a raised marine edge retaining incidental liquid. A removable blue polymer mesh screen covers the immediate drain zone while allowing tools to rest above runoff. The welded open frame uses adjustable stainless feet and a low three-bar drying shelf, leaving the waste trap visible beneath the top.

주요 기능

Four-way cross-breaking directs runoff from the broad work surface to one central outlet.

The raised marine edge contains incidental liquid without creating a deep lifting obstruction around the table.

A removable blue mesh screen keeps parts above the waste and provides tool-free access to the strainer.

The open underframe exposes the trap and carries a low bar shelf that does not form a solid dust-catching surface.

고객 제품 관심사

Wet parts need a large stable landing area that drains deliberately without the lifting depth of a sink or the standing water of a flat table.

A flat stainless worktop leaves puddles beneath rinsed components.The four-way dished surface continuously falls toward the center waste.

Small parts can cover the strainer and stop drainage.The raised blue mesh screen bridges the outlet while maintaining open flow paths.

Runoff reaches the floor when an item displaces water across an unbounded edge.The formed marine perimeter retains transient liquid on the draining surface.

An enclosed base hides a blocked trap and creates inaccessible wet surfaces.The open tubular frame leaves the complete waste and cleanout visible.

일반적인 응용 프로그램

Cleanroom wet parts inspectionPharmaceutical component drainingBiotechnology utensil dryingControlled washroom transfer pointsMedical-device rinse staging

기술 매개변수

Typical configurable specifications for a stainless cleanroom drain table are listed below.

핵심 재료	Type 304 stainless cross-broken drain top and tubular frame with removable blue polypropylene mesh screen
패널 두께	1.5 mm 16-gauge dished top with reinforced underside
유효 폭	1500 mm overall wet-work width
최대 길이	750 mm maximum front-to-back table depth
강철 면면 두께	1.5 mm Type 304 stainless top; 1.2 mm tubular frame wall
코어 밀도	7900 - 8000 kg / m 3 Type 304 스테인레스 스틸
열전도도 (Thermal Conductivity)	14 - 17 W / (m · K) 유형 304 스테인레스 스틸
표면 마무리	Satin-brushed drain top, passivated welds, blue removable mesh and brushed tubular frame
접합 유형	Cross-broken top with welded marine edge, central 50 mm basket waste, open trap and adjustable leg sockets
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Type 316 stainless topMobile caster frameSolid or multi-bar undershelfSide-mounted hose bracket

Planning a Stainless Steel Drain Table specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.