Temiz Oda Ekipmanları ve Aseptik Tesis Temelleri için Tek Duraklı TedarikçinizUluslararası Proje Destekleri
Open mobile navigationClose mobile navigation
Ana Sayfa / Ürünler / Temiz Oda Kapıları, Pencereler ve Kilitleme Sistemleri / Radiation-Shielding Lead Glass Cleanroom Window
Temiz Oda Kapıları, Pencereler ve Kilitleme Sistemleri

Radyasyon Koruyucu Kurşun Cam Temiz Oda Penceresi

A radiation-shielding observation window that combines transparent lead-barium glass with lead-lined frame returns to maintain visual access across an X-ray barrier.
  • Lead-Barium Shielding Glass
  • Continuous Shielded Frame
  • Clear Operator Sightline
  • Flush Cleanroom Finish
Alıntı isteği Browse ürünleri

Ürün tanıtımı

This window uses high-density lead-barium glass to provide transparent shielding between a cleanroom or controlled laboratory and an X-ray source. The glass overlaps lead-lined frame returns so the shield does not stop at the visible edge, and the clean side is finished with sealed stainless-steel or powder-coated trim. Glass thickness and corresponding lead equivalence are selected from the operating tube voltage and the room shielding design; the product page does not assign a universal rating to every configuration.

Ana Özellikler

Lead-barium glass maintains direct observation while attenuating diagnostic and industrial X-ray energy.

Overlapping lead-lined reveals continue shielding around the perimeter rather than leaving an edge gap.

Ground and chamfered glass edges reduce handling damage during installation of the dense pane.

A flush sealed room face separates the specialist glass edge and shielding liner from routine cleaning.

Müşteri Ürün Sorunları

The transparent shield must match the surrounding barrier and preserve continuous overlap at the frame while supporting a significantly heavier pane than ordinary glass.

Radiation can bypass the glazing through an unshielded perimeter reveal.Lead-lined frame returns overlap the lead-glass edge and connect with the adjoining wall shielding.
High-density lead glass is heavy and vulnerable to edge damage during handling.A reinforced frame, full setting blocks and finished safety chamfers distribute the pane load.
Specifying lead equivalence without reference to tube voltage can misstate protection.Glass thickness and shielding value are selected from the required operating voltage and barrier schedule.

Tipik uygulamalar

X-ray inspection cleanroomsMedical imaging support roomsRadiopharmaceutical laboratoriesNon-destructive testing observation stations

Teknik parametreler

Representative Corning Med-X-type glass and cleanroom-frame ranges are shown below; the shielding schedule determines the final glass thickness.

Temel malzemelerHigh-lead and barium radiation-shielding glass with lead-lined perimeter frame
Panel kalınlığı4–20 mm lead glass; typically 75–150 mm overall frame depth
Effective Width (Etkili Genişlik)300–1400 mm clear viewing width
Maksimum uzunluk2800 mm glass plate length where weight and shielding design permit
Çelik yüz yüze kalınlığı1.2–2.0 mm stainless-steel liner over project-selected lead sheet
Core Density (Çekirdek Yoğunluğu)Approximately 4800 kg/m³ for lead-barium shielding glass
Termal İletkenlikApproximately 0.55–0.75 W/(m·K) for dense lead glass
Yüzey bitirmeOptically polished clear lead glass with brushed stainless or powder-coated flush trim
Ortak tipFour-side supported glazing with continuous lead overlap, resilient setting blocks and sealed cleanroom perimeter
Customization (Özelleşme)Kullanılan amaçlanan uygulama ve çalışma ortamına göre kullanılabilir

Mevcut Seçenekler

Multiple glass thickness and lead-equivalence rangesLaminated safety constructionSealed double-glazed unit304 or 316 stainless-steel finish

Planning a Radiation-Shielding Lead Glass Cleanroom Window specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun
E-posta Bize whatsapp WeChat

Ana Sayfa

Ürünler

Haberler

Hakkımızda

İletişim