영어
독일어
아랍어
프랑스어
인도네시아어
일본어
한국어현재 Current
말레이어
포르투갈어
러시아어
스페인어
태국어
터키어
베트남어
클린룸 도어, 창문 및 인터락 시스템
방사선 차단 납 유리 클린룸 창
A radiation-shielding observation window that combines transparent lead-barium glass with lead-lined frame returns to maintain visual access across an X-ray barrier.
- Lead-Barium Shielding Glass
- Continuous Shielded Frame
- Clear Operator Sightline
- Flush Cleanroom Finish
상품 소개
This window uses high-density lead-barium glass to provide transparent shielding between a cleanroom or controlled laboratory and an X-ray source. The glass overlaps lead-lined frame returns so the shield does not stop at the visible edge, and the clean side is finished with sealed stainless-steel or powder-coated trim. Glass thickness and corresponding lead equivalence are selected from the operating tube voltage and the room shielding design; the product page does not assign a universal rating to every configuration.
주요 기능
Overlapping lead-lined reveals continue shielding around the perimeter rather than leaving an edge gap.
Ground and chamfered glass edges reduce handling damage during installation of the dense pane.
A flush sealed room face separates the specialist glass edge and shielding liner from routine cleaning.
고객 제품 관심사
The transparent shield must match the surrounding barrier and preserve continuous overlap at the frame while supporting a significantly heavier pane than ordinary glass.
Radiation can bypass the glazing through an unshielded perimeter reveal.Lead-lined frame returns overlap the lead-glass edge and connect with the adjoining wall shielding.
High-density lead glass is heavy and vulnerable to edge damage during handling.A reinforced frame, full setting blocks and finished safety chamfers distribute the pane load.
Specifying lead equivalence without reference to tube voltage can misstate protection.Glass thickness and shielding value are selected from the required operating voltage and barrier schedule.
일반적인 응용 프로그램
X-ray inspection cleanroomsMedical imaging support roomsRadiopharmaceutical laboratoriesNon-destructive testing observation stations
기술 매개변수
Representative Corning Med-X-type glass and cleanroom-frame ranges are shown below; the shielding schedule determines the final glass thickness.
| 핵심 재료 | High-lead and barium radiation-shielding glass with lead-lined perimeter frame |
|---|---|
| 패널 두께 | 4–20 mm lead glass; typically 75–150 mm overall frame depth |
| 유효 폭 | 300–1400 mm clear viewing width |
| 최대 길이 | 2800 mm glass plate length where weight and shielding design permit |
| 강철 면면 두께 | 1.2–2.0 mm stainless-steel liner over project-selected lead sheet |
| 코어 밀도 | Approximately 4800 kg/m³ for lead-barium shielding glass |
| 열전도도 (Thermal Conductivity) | Approximately 0.55–0.75 W/(m·K) for dense lead glass |
| 표면 마무리 | Optically polished clear lead glass with brushed stainless or powder-coated flush trim |
| 접합 유형 | Four-side supported glazing with continuous lead overlap, resilient setting blocks and sealed cleanroom perimeter |
| 사용자 정의 | 사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능 |
사용 가능한 옵션
Multiple glass thickness and lead-equivalence rangesLaminated safety constructionSealed double-glazed unit304 or 316 stainless-steel finish
Planning a Radiation-Shielding Lead Glass Cleanroom Window specification?
치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.
