日本語
ドイツ人。
アラビア語：アラビア語
フランス語で
インドネシア語
日本語で。流れ
韓国語
マレー語
ポルトガル語
ロシア語
スペイン語
タイ語
トルコ語
ベトナム語
クリーンルームのドア、窓およびインターロックシステム
Radiation—Shielding 鉛ガラスのクリーンルームの窓
A radiation-shielding observation window that combines transparent lead-barium glass with lead-lined frame returns to maintain visual access across an X-ray barrier.
- Lead-Barium Shielding Glass
- Continuous Shielded Frame
- Clear Operator Sightline
- Flush Cleanroom Finish
商品紹介
This window uses high-density lead-barium glass to provide transparent shielding between a cleanroom or controlled laboratory and an X-ray source. The glass overlaps lead-lined frame returns so the shield does not stop at the visible edge, and the clean side is finished with sealed stainless-steel or powder-coated trim. Glass thickness and corresponding lead equivalence are selected from the operating tube voltage and the room shielding design; the product page does not assign a universal rating to every configuration.
主要な特徴
Overlapping lead-lined reveals continue shielding around the perimeter rather than leaving an edge gap.
Ground and chamfered glass edges reduce handling damage during installation of the dense pane.
A flush sealed room face separates the specialist glass edge and shielding liner from routine cleaning.
お客様の製品に関する懸念事項
The transparent shield must match the surrounding barrier and preserve continuous overlap at the frame while supporting a significantly heavier pane than ordinary glass.
Radiation can bypass the glazing through an unshielded perimeter reveal.Lead-lined frame returns overlap the lead-glass edge and connect with the adjoining wall shielding.
High-density lead glass is heavy and vulnerable to edge damage during handling.A reinforced frame, full setting blocks and finished safety chamfers distribute the pane load.
Specifying lead equivalence without reference to tube voltage can misstate protection.Glass thickness and shielding value are selected from the required operating voltage and barrier schedule.
典型的な用途
X-ray inspection cleanroomsMedical imaging support roomsRadiopharmaceutical laboratoriesNon-destructive testing observation stations
技術的なパラメータ
Representative Corning Med-X-type glass and cleanroom-frame ranges are shown below; the shielding schedule determines the final glass thickness.
| コア材料 | High-lead and barium radiation-shielding glass with lead-lined perimeter frame |
|---|---|
| パネルの厚さ | 4–20 mm lead glass; typically 75–150 mm overall frame depth |
| 有効幅 | 300–1400 mm clear viewing width |
| 最大長さ | 2800 mm glass plate length where weight and shielding design permit |
| 鋼鉄の厚さを直面する | 1.2–2.0 mm stainless-steel liner over project-selected lead sheet |
| コア密度 | Approximately 4800 kg/m³ for lead-barium shielding glass |
| 熱伝導率 | Approximately 0.55–0.75 W/(m·K) for dense lead glass |
| 表面仕上げ | Optically polished clear lead glass with brushed stainless or powder-coated flush trim |
| ジョイントタイプ | Four-side supported glazing with continuous lead overlap, resilient setting blocks and sealed cleanroom perimeter |
| カスタマイズ | 目的のアプリケーションおよび動作環境に基づいて利用可能 |
利用可能なオプション
Multiple glass thickness and lead-equivalence rangesLaminated safety constructionSealed double-glazed unit304 or 316 stainless-steel finish
Planning a Radiation-Shielding Lead Glass Cleanroom Window specification?
寸法、設置条件、性能目標、必要な表面仕上げをお送りください。
