İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Laminar Flow ve Containment Equipment
Mobil Laminar Flow Hood
A wheeled clean-air enclosure that can be positioned over a table or compact instrument to provide temporary filtered product protection.
- Lockable Mobile Frame
- Compact Fan-Filter Module
- Clear Flexible Enclosure
- Roll-Over Process Positioning
Ürün tanıtımı
This hood combines a light tubular frame, fan-filter module and clear side enclosure on cleanroom-compatible casters. The open lower frame can straddle a fixed workbench or small machine, allowing the filtered zone to be brought to the process rather than moving the process itself. Locking casters and leveling pads stabilize the unit during use. The hood is intended for temporary non-hazardous product protection and is connected to facility power at its operating position.
Ana Özellikler
Non-marking locking casters secure the hood after positioning.
Clear side panels show the process while restricting lateral room drafts.
A top fan-filter module keeps the lower access area free of equipment.
Quick-release curtain or panel mounts simplify relocation and cleaning.
Müşteri Ürün Sorunları
A movable hood must pass through doors, clear installed equipment and remain stable enough for repeatable airflow at the destination.
Sensitive equipment cannot be moved to a fixed clean bench.The open lower frame rolls over the installed process location.
Caster movement changes the working height.Locking casters and adjustable pads stabilize the frame at its final position.
A wide hood cannot pass through standard doorways.A narrow modular frame and removable panels support controlled relocation.
Loose curtains contact the process during movement.Quick-release curtains can be secured or removed before the hood is rolled.
Tipik uygulamalar
Temporary clean assemblyInstrument maintenance under filtered airBatch changeover protectionClean component staging
Teknik parametreler
Typical configurable construction ranges for a mobile laminar flow hood are listed below.
| Temel malzemeler | Anodized aluminum tubular frame with powder-coated steel fan-filter housing and clear PVC or polycarbonate panels |
|---|---|
| Panel kalınlığı | 20-40 mm framed enclosure sections |
| Effective Width (Etkili Genişlik) | 800-1800 mm clear protected width |
| Maksimum uzunluk | Up to 2400 mm overall mobile height |
| Çelik yüz yüze kalınlığı | 0.8-1.0 mm powder-coated fan-filter housing |
| Core Density (Çekirdek Yoğunluğu) | Approximately 1200 kg/m³ for solid polycarbonate enclosure panels |
| Termal İletkenlik | 0.19-0.22 W/(m·K) for polycarbonate panels |
| Yüzey bitirme | Natural anodized frame, white filter housing and clear cleanroom-grade enclosure panels |
| Ortak tip | Quick-release modular frame with gasketed fan-filter mount and lockable caster bases |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Rigid or flexible side panelsBattery-backed fan operationHeight-adjustable frameAntistatic clear curtains
Planning a Mobile Laminar Flow Hood specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
