Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Laminar Flow und Containment Equipment
Mobil Laminar Flow Hood
A wheeled clean-air enclosure that can be positioned over a table or compact instrument to provide temporary filtered product protection.
- Lockable Mobile Frame
- Compact Fan-Filter Module
- Clear Flexible Enclosure
- Roll-Over Process Positioning
Produkteinführung
This hood combines a light tubular frame, fan-filter module and clear side enclosure on cleanroom-compatible casters. The open lower frame can straddle a fixed workbench or small machine, allowing the filtered zone to be brought to the process rather than moving the process itself. Locking casters and leveling pads stabilize the unit during use. The hood is intended for temporary non-hazardous product protection and is connected to facility power at its operating position.
Key Features
Non-marking locking casters secure the hood after positioning.
Clear side panels show the process while restricting lateral room drafts.
A top fan-filter module keeps the lower access area free of equipment.
Quick-release curtain or panel mounts simplify relocation and cleaning.
Kunden Produktbedenken
A movable hood must pass through doors, clear installed equipment and remain stable enough for repeatable airflow at the destination.
Sensitive equipment cannot be moved to a fixed clean bench.The open lower frame rolls over the installed process location.
Caster movement changes the working height.Locking casters and adjustable pads stabilize the frame at its final position.
A wide hood cannot pass through standard doorways.A narrow modular frame and removable panels support controlled relocation.
Loose curtains contact the process during movement.Quick-release curtains can be secured or removed before the hood is rolled.
Typische Anwendungen
Temporary clean assemblyInstrument maintenance under filtered airBatch changeover protectionClean component staging
Technische Parameter
Typical configurable construction ranges for a mobile laminar flow hood are listed below.
| Core Material | Anodized aluminum tubular frame with powder-coated steel fan-filter housing and clear PVC or polycarbonate panels |
|---|---|
| Panel Dicke | 20-40 mm framed enclosure sections |
| Effektive Breite | 800-1800 mm clear protected width |
| Maximale Länge | Up to 2400 mm overall mobile height |
| Stahl facing Dicke | 0.8-1.0 mm powder-coated fan-filter housing |
| Kerndichte | Approximately 1200 kg/m³ for solid polycarbonate enclosure panels |
| Thermische Leitfähigkeit | 0.19-0.22 W/(m·K) for polycarbonate panels |
| Oberfläche Finish | Natural anodized frame, white filter housing and clear cleanroom-grade enclosure panels |
| Gemeinsamer Typ | Quick-release modular frame with gasketed fan-filter mount and lockable caster bases |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Rigid or flexible side panelsBattery-backed fan operationHeight-adjustable frameAntistatic clear curtains
Planning a Mobile Laminar Flow Hood specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
