Complete mobile laminar flow hood on lockable cleanroom casters

層流 · 封じ込め装置

Mobile のラミナールフローフード

A wheeled clean-air enclosure that can be positioned over a table or compact instrument to provide temporary filtered product protection.

Lockable Mobile Frame
Compact Fan-Filter Module
Clear Flexible Enclosure
Roll-Over Process Positioning

見積もりリクエスト製品案内

商品紹介

This hood combines a light tubular frame, fan-filter module and clear side enclosure on cleanroom-compatible casters. The open lower frame can straddle a fixed workbench or small machine, allowing the filtered zone to be brought to the process rather than moving the process itself. Locking casters and leveling pads stabilize the unit during use. The hood is intended for temporary non-hazardous product protection and is connected to facility power at its operating position.

主要な特徴

An open-base frame can roll around existing tables and compact instruments.

Non-marking locking casters secure the hood after positioning.

Clear side panels show the process while restricting lateral room drafts.

A top fan-filter module keeps the lower access area free of equipment.

Quick-release curtain or panel mounts simplify relocation and cleaning.

お客様の製品に関する懸念事項

A movable hood must pass through doors, clear installed equipment and remain stable enough for repeatable airflow at the destination.

Sensitive equipment cannot be moved to a fixed clean bench.The open lower frame rolls over the installed process location.

Caster movement changes the working height.Locking casters and adjustable pads stabilize the frame at its final position.

A wide hood cannot pass through standard doorways.A narrow modular frame and removable panels support controlled relocation.

Loose curtains contact the process during movement.Quick-release curtains can be secured or removed before the hood is rolled.

典型的な用途

Temporary clean assemblyInstrument maintenance under filtered airBatch changeover protectionClean component staging

技術的なパラメータ

Typical configurable construction ranges for a mobile laminar flow hood are listed below.

コア材料	Anodized aluminum tubular frame with powder-coated steel fan-filter housing and clear PVC or polycarbonate panels
パネルの厚さ	20-40 mm framed enclosure sections
有効幅	800-1800 mm clear protected width
最大長さ	Up to 2400 mm overall mobile height
鋼鉄の厚さを直面する	0.8-1.0 mm powder-coated fan-filter housing
コア密度	Approximately 1200 kg/m³ for solid polycarbonate enclosure panels
熱伝導率	0.19-0.22 W/(m·K) for polycarbonate panels
表面仕上げ	Natural anodized frame, white filter housing and clear cleanroom-grade enclosure panels
ジョイントタイプ	Quick-release modular frame with gasketed fan-filter mount and lockable caster bases
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Rigid or flexible side panelsBattery-backed fan operationHeight-adjustable frameAntistatic clear curtains

Planning a Mobile Laminar Flow Hood specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する