English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Оборудование для ламинарного потока и ограничения
Мобильный ламинарный потоковый капот
A wheeled clean-air enclosure that can be positioned over a table or compact instrument to provide temporary filtered product protection.
- Lockable Mobile Frame
- Compact Fan-Filter Module
- Clear Flexible Enclosure
- Roll-Over Process Positioning
Введение продукции
This hood combines a light tubular frame, fan-filter module and clear side enclosure on cleanroom-compatible casters. The open lower frame can straddle a fixed workbench or small machine, allowing the filtered zone to be brought to the process rather than moving the process itself. Locking casters and leveling pads stabilize the unit during use. The hood is intended for temporary non-hazardous product protection and is connected to facility power at its operating position.
Основные характеристики
Non-marking locking casters secure the hood after positioning.
Clear side panels show the process while restricting lateral room drafts.
A top fan-filter module keeps the lower access area free of equipment.
Quick-release curtain or panel mounts simplify relocation and cleaning.
Обеспокоенность клиентов продуктами
A movable hood must pass through doors, clear installed equipment and remain stable enough for repeatable airflow at the destination.
Sensitive equipment cannot be moved to a fixed clean bench.The open lower frame rolls over the installed process location.
Caster movement changes the working height.Locking casters and adjustable pads stabilize the frame at its final position.
A wide hood cannot pass through standard doorways.A narrow modular frame and removable panels support controlled relocation.
Loose curtains contact the process during movement.Quick-release curtains can be secured or removed before the hood is rolled.
Типичные приложения
Temporary clean assemblyInstrument maintenance under filtered airBatch changeover protectionClean component staging
Технические параметры
Typical configurable construction ranges for a mobile laminar flow hood are listed below.
| Основной материал | Anodized aluminum tubular frame with powder-coated steel fan-filter housing and clear PVC or polycarbonate panels |
|---|---|
| Толщина панели | 20-40 mm framed enclosure sections |
| эффективная ширина | 800-1800 mm clear protected width |
| Максимальная длина | Up to 2400 mm overall mobile height |
| Толщина линий стали | 0.8-1.0 mm powder-coated fan-filter housing |
| Плотность ядра | Approximately 1200 kg/m³ for solid polycarbonate enclosure panels |
| Теплопроводимость | 0.19-0.22 W/(m·K) for polycarbonate panels |
| Поверхностная отделка | Natural anodized frame, white filter housing and clear cleanroom-grade enclosure panels |
| Объединенный тип | Quick-release modular frame with gasketed fan-filter mount and lockable caster bases |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Rigid or flexible side panelsBattery-backed fan operationHeight-adjustable frameAntistatic clear curtains
Planning a Mobile Laminar Flow Hood specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
