İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Laminar Flow ve Containment Equipment
Laminar Flow Canopy
A freestanding overhead clean-air canopy that covers a worktable or process machine while preserving open access around the protected zone.
- Open Process Access
- Freestanding Overhead Frame
- Uniform HEPA Downflow
- Configurable Curtain Sides
Ürün tanıtımı
The canopy uses a floor-supported frame to carry a filtered overhead plenum above existing equipment. Its open sides permit carts, operators and maintenance tools to approach the process, while optional flexible curtains can be added where room drafts need greater control. Leveling feet and adjustable cross-members align the diffuser above the working footprint. Unlike a ceiling-suspended hood, the canopy transfers its load directly to the floor and can be repositioned after controlled disassembly.
Ana Özellikler
Open sides give technicians direct access to installed process equipment.
The overhead plenum can be sized to the actual clean-air footprint rather than the room area.
Leveling feet stabilize the frame on cleanroom floors with minor variation.
Optional flexible curtains reduce lateral mixing without creating permanent walls.
Müşteri Ürün Sorunları
A local clean-air zone must fit around existing process equipment while keeping its support frame stable and outside normal operator movement.
The ceiling cannot carry a suspended filter plenum.A floor-supported aluminum or stainless frame carries the complete canopy load.
Permanent walls block maintenance access to the machine.Open sides and removable curtains preserve full process access.
A standard canopy does not match an irregular equipment footprint.Modular cross-members and filter sections follow the selected process dimensions.
Uneven floors twist the overhead diffuser plane.Adjustable leveling feet and bolted frame corners allow final alignment.
Tipik uygulamalar
Aseptic component stagingOpen filling-point protectionMedical-device assembly cellsClean inspection islands
Teknik parametreler
Typical configurable construction ranges for a freestanding laminar flow canopy are listed below.
| Temel malzemeler | Anodized aluminum or SUS304 support frame with powder-coated steel plenum and aluminum honeycomb diffusers |
|---|---|
| Panel kalınlığı | 50-100 mm overhead plenum and diffuser sections |
| Effective Width (Etkili Genişlik) | 1500-4000 mm protected process width |
| Maksimum uzunluk | Up to 6000 mm canopy length |
| Çelik yüz yüze kalınlığı | 0.8-1.2 mm powder-coated steel plenum skins |
| Core Density (Çekirdek Yoğunluğu) | 30-50 kg/m³ aluminum honeycomb diffuser core |
| Termal İletkenlik | 1.5-2.5 W/(m·K) across the diffuser-panel assembly |
| Yüzey bitirme | White powder-coated overhead plenum with natural anodized or brushed stainless frame |
| Ortak tip | Bolted modular support frame with gasketed fan-filter modules and sealed plenum flanges |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Clear PVC strip curtainsRemote fan-filter controlsIntegrated LED lightingMobile lockable base frame
Planning a Laminar Flow Canopy specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
