Freestanding laminar flow canopy with complete overhead HEPA plenum

Aliran Laminar dan Peralatan Penahanan

Laminar Aliran Canopy (Laminar Flow Canopy)

A freestanding overhead clean-air canopy that covers a worktable or process machine while preserving open access around the protected zone.

Open Process Access
Freestanding Overhead Frame
Uniform HEPA Downflow
Configurable Curtain Sides

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The canopy uses a floor-supported frame to carry a filtered overhead plenum above existing equipment. Its open sides permit carts, operators and maintenance tools to approach the process, while optional flexible curtains can be added where room drafts need greater control. Leveling feet and adjustable cross-members align the diffuser above the working footprint. Unlike a ceiling-suspended hood, the canopy transfers its load directly to the floor and can be repositioned after controlled disassembly.

Fitur utama:

A self-supporting frame avoids structural loading of the building ceiling.

Open sides give technicians direct access to installed process equipment.

The overhead plenum can be sized to the actual clean-air footprint rather than the room area.

Leveling feet stabilize the frame on cleanroom floors with minor variation.

Optional flexible curtains reduce lateral mixing without creating permanent walls.

Kekhawatiran produk pelanggan

A local clean-air zone must fit around existing process equipment while keeping its support frame stable and outside normal operator movement.

The ceiling cannot carry a suspended filter plenum.A floor-supported aluminum or stainless frame carries the complete canopy load.

Permanent walls block maintenance access to the machine.Open sides and removable curtains preserve full process access.

A standard canopy does not match an irregular equipment footprint.Modular cross-members and filter sections follow the selected process dimensions.

Uneven floors twist the overhead diffuser plane.Adjustable leveling feet and bolted frame corners allow final alignment.

Aplikasi yang Tipis

Aseptic component stagingOpen filling-point protectionMedical-device assembly cellsClean inspection islands

Parameter teknis

Typical configurable construction ranges for a freestanding laminar flow canopy are listed below.

Bahan inti	Anodized aluminum or SUS304 support frame with powder-coated steel plenum and aluminum honeycomb diffusers
Ketebalan Panel (Panel Thickness)	50-100 mm overhead plenum and diffuser sections
Efektif lebar	1500-4000 mm protected process width
Panjang maksimum	Up to 6000 mm canopy length
Baja menghadap ketebalan	0.8-1.2 mm powder-coated steel plenum skins
Kepadatan inti (core density)	30-50 kg/m³ aluminum honeycomb diffuser core
Konduktivitas Termal (Thermal Conductivity)	1.5-2.5 W/(m·K) across the diffuser-panel assembly
Permukaan selesai	White powder-coated overhead plenum with natural anodized or brushed stainless frame
Jenis Bersama	Bolted modular support frame with gasketed fan-filter modules and sealed plenum flanges
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Clear PVC strip curtainsRemote fan-filter controlsIntegrated LED lightingMobile lockable base frame

Planning a Laminar Flow Canopy specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami