Freestanding laminar flow canopy with complete overhead HEPA plenum

層流 · 封じ込め装置

Laminar の流れのキャノピー

A freestanding overhead clean-air canopy that covers a worktable or process machine while preserving open access around the protected zone.

Open Process Access
Freestanding Overhead Frame
Uniform HEPA Downflow
Configurable Curtain Sides

見積もりリクエスト製品案内

商品紹介

The canopy uses a floor-supported frame to carry a filtered overhead plenum above existing equipment. Its open sides permit carts, operators and maintenance tools to approach the process, while optional flexible curtains can be added where room drafts need greater control. Leveling feet and adjustable cross-members align the diffuser above the working footprint. Unlike a ceiling-suspended hood, the canopy transfers its load directly to the floor and can be repositioned after controlled disassembly.

主要な特徴

A self-supporting frame avoids structural loading of the building ceiling.

Open sides give technicians direct access to installed process equipment.

The overhead plenum can be sized to the actual clean-air footprint rather than the room area.

Leveling feet stabilize the frame on cleanroom floors with minor variation.

Optional flexible curtains reduce lateral mixing without creating permanent walls.

お客様の製品に関する懸念事項

A local clean-air zone must fit around existing process equipment while keeping its support frame stable and outside normal operator movement.

The ceiling cannot carry a suspended filter plenum.A floor-supported aluminum or stainless frame carries the complete canopy load.

Permanent walls block maintenance access to the machine.Open sides and removable curtains preserve full process access.

A standard canopy does not match an irregular equipment footprint.Modular cross-members and filter sections follow the selected process dimensions.

Uneven floors twist the overhead diffuser plane.Adjustable leveling feet and bolted frame corners allow final alignment.

典型的な用途

Aseptic component stagingOpen filling-point protectionMedical-device assembly cellsClean inspection islands

技術的なパラメータ

Typical configurable construction ranges for a freestanding laminar flow canopy are listed below.

コア材料	Anodized aluminum or SUS304 support frame with powder-coated steel plenum and aluminum honeycomb diffusers
パネルの厚さ	50-100 mm overhead plenum and diffuser sections
有効幅	1500-4000 mm protected process width
最大長さ	Up to 6000 mm canopy length
鋼鉄の厚さを直面する	0.8-1.2 mm powder-coated steel plenum skins
コア密度	30 — 50 kg / m3 アルミニウムの蜂の巣の拡散器コア
熱伝導率	1.5-2.5 W/(m·K) across the diffuser-panel assembly
表面仕上げ	White powder-coated overhead plenum with natural anodized or brushed stainless frame
ジョイントタイプ	Bolted modular support frame with gasketed fan-filter modules and sealed plenum flanges
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Clear PVC strip curtainsRemote fan-filter controlsIntegrated LED lightingMobile lockable base frame

Planning a Laminar Flow Canopy specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する