Freestanding laminar flow canopy with complete overhead HEPA plenum

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

층층 흐름 캐노피

A freestanding overhead clean-air canopy that covers a worktable or process machine while preserving open access around the protected zone.

Open Process Access
Freestanding Overhead Frame
Uniform HEPA Downflow
Configurable Curtain Sides

견적 요청 제품 찾아보기

상품 소개

The canopy uses a floor-supported frame to carry a filtered overhead plenum above existing equipment. Its open sides permit carts, operators and maintenance tools to approach the process, while optional flexible curtains can be added where room drafts need greater control. Leveling feet and adjustable cross-members align the diffuser above the working footprint. Unlike a ceiling-suspended hood, the canopy transfers its load directly to the floor and can be repositioned after controlled disassembly.

주요 기능

A self-supporting frame avoids structural loading of the building ceiling.

Open sides give technicians direct access to installed process equipment.

The overhead plenum can be sized to the actual clean-air footprint rather than the room area.

Leveling feet stabilize the frame on cleanroom floors with minor variation.

Optional flexible curtains reduce lateral mixing without creating permanent walls.

고객 제품 관심사

A local clean-air zone must fit around existing process equipment while keeping its support frame stable and outside normal operator movement.

The ceiling cannot carry a suspended filter plenum.A floor-supported aluminum or stainless frame carries the complete canopy load.

Permanent walls block maintenance access to the machine.Open sides and removable curtains preserve full process access.

A standard canopy does not match an irregular equipment footprint.Modular cross-members and filter sections follow the selected process dimensions.

Uneven floors twist the overhead diffuser plane.Adjustable leveling feet and bolted frame corners allow final alignment.

일반적인 응용 프로그램

Aseptic component stagingOpen filling-point protectionMedical-device assembly cellsClean inspection islands

기술 매개변수

Typical configurable construction ranges for a freestanding laminar flow canopy are listed below.

핵심 재료	Anodized aluminum or SUS304 support frame with powder-coated steel plenum and aluminum honeycomb diffusers
패널 두께	50-100 mm overhead plenum and diffuser sections
유효 폭	1500-4000 mm protected process width
최대 길이	Up to 6000 mm canopy length
강철 면면 두께	0.8-1.2 mm powder-coated steel plenum skins
코어 밀도	30 - 50 kg / m 3 알루미늄 벌집 확산 코어
열전도도 (Thermal Conductivity)	1. 5 - 2. 5 W / (m · K) 디플로저 패널 어셈블리 전체
표면 마무리	White powder-coated overhead plenum with natural anodized or brushed stainless frame
접합 유형	Bolted modular support frame with gasketed fan-filter modules and sealed plenum flanges
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Clear PVC strip curtainsRemote fan-filter controlsIntegrated LED lightingMobile lockable base frame

Planning a Laminar Flow Canopy specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.