English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Оборудование для ламинарного потока и ограничения
Ламинарный потоковый навес
A freestanding overhead clean-air canopy that covers a worktable or process machine while preserving open access around the protected zone.
- Open Process Access
- Freestanding Overhead Frame
- Uniform HEPA Downflow
- Configurable Curtain Sides
Введение продукции
The canopy uses a floor-supported frame to carry a filtered overhead plenum above existing equipment. Its open sides permit carts, operators and maintenance tools to approach the process, while optional flexible curtains can be added where room drafts need greater control. Leveling feet and adjustable cross-members align the diffuser above the working footprint. Unlike a ceiling-suspended hood, the canopy transfers its load directly to the floor and can be repositioned after controlled disassembly.
Основные характеристики
Open sides give technicians direct access to installed process equipment.
The overhead plenum can be sized to the actual clean-air footprint rather than the room area.
Leveling feet stabilize the frame on cleanroom floors with minor variation.
Optional flexible curtains reduce lateral mixing without creating permanent walls.
Обеспокоенность клиентов продуктами
A local clean-air zone must fit around existing process equipment while keeping its support frame stable and outside normal operator movement.
The ceiling cannot carry a suspended filter plenum.A floor-supported aluminum or stainless frame carries the complete canopy load.
Permanent walls block maintenance access to the machine.Open sides and removable curtains preserve full process access.
A standard canopy does not match an irregular equipment footprint.Modular cross-members and filter sections follow the selected process dimensions.
Uneven floors twist the overhead diffuser plane.Adjustable leveling feet and bolted frame corners allow final alignment.
Типичные приложения
Aseptic component stagingOpen filling-point protectionMedical-device assembly cellsClean inspection islands
Технические параметры
Typical configurable construction ranges for a freestanding laminar flow canopy are listed below.
| Основной материал | Anodized aluminum or SUS304 support frame with powder-coated steel plenum and aluminum honeycomb diffusers |
|---|---|
| Толщина панели | 50-100 mm overhead plenum and diffuser sections |
| эффективная ширина | 1500-4000 mm protected process width |
| Максимальная длина | Up to 6000 mm canopy length |
| Толщина линий стали | 0.8-1.2 mm powder-coated steel plenum skins |
| Плотность ядра | 30-50 kg/m³ aluminum honeycomb diffuser core |
| Теплопроводимость | 1.5-2.5 W/(m·K) across the diffuser-panel assembly |
| Поверхностная отделка | White powder-coated overhead plenum with natural anodized or brushed stainless frame |
| Объединенный тип | Bolted modular support frame with gasketed fan-filter modules and sealed plenum flanges |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Clear PVC strip curtainsRemote fan-filter controlsIntegrated LED lightingMobile lockable base frame
Planning a Laminar Flow Canopy specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
