Freestanding laminar flow canopy with complete overhead HEPA plenum

Aliran Laminar dan Peralatan Pengekangan

Kanopi Aliran Laminar

A freestanding overhead clean-air canopy that covers a worktable or process machine while preserving open access around the protected zone.

Open Process Access
Freestanding Overhead Frame
Uniform HEPA Downflow
Configurable Curtain Sides

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The canopy uses a floor-supported frame to carry a filtered overhead plenum above existing equipment. Its open sides permit carts, operators and maintenance tools to approach the process, while optional flexible curtains can be added where room drafts need greater control. Leveling feet and adjustable cross-members align the diffuser above the working footprint. Unlike a ceiling-suspended hood, the canopy transfers its load directly to the floor and can be repositioned after controlled disassembly.

Ciri-ciri Utama

A self-supporting frame avoids structural loading of the building ceiling.

Open sides give technicians direct access to installed process equipment.

The overhead plenum can be sized to the actual clean-air footprint rather than the room area.

Leveling feet stabilize the frame on cleanroom floors with minor variation.

Optional flexible curtains reduce lateral mixing without creating permanent walls.

Kebimbangan Produk Pelanggan

A local clean-air zone must fit around existing process equipment while keeping its support frame stable and outside normal operator movement.

The ceiling cannot carry a suspended filter plenum.A floor-supported aluminum or stainless frame carries the complete canopy load.

Permanent walls block maintenance access to the machine.Open sides and removable curtains preserve full process access.

A standard canopy does not match an irregular equipment footprint.Modular cross-members and filter sections follow the selected process dimensions.

Uneven floors twist the overhead diffuser plane.Adjustable leveling feet and bolted frame corners allow final alignment.

Permohonan yang biasa

Aseptic component stagingOpen filling-point protectionMedical-device assembly cellsClean inspection islands

Parameter teknikal

Typical configurable construction ranges for a freestanding laminar flow canopy are listed below.

Bahan Teras	Anodized aluminum or SUS304 support frame with powder-coated steel plenum and aluminum honeycomb diffusers
Ketebalan Panel	50-100 mm overhead plenum and diffuser sections
Lebar berkesan	1500-4000 mm protected process width
Panjang maksimum	Up to 6000 mm canopy length
Keluli Menghadapi Ketebalan	0.8-1.2 mm powder-coated steel plenum skins
Ketumpatan teras	30-50 kg/m³ aluminum honeycomb diffuser core
Kekonduksian Terma	1.5-2.5 W/(m·K) across the diffuser-panel assembly
Kemasan permukaan	White powder-coated overhead plenum with natural anodized or brushed stainless frame
Jenis Bersatu	Bolted modular support frame with gasketed fan-filter modules and sealed plenum flanges
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Clear PVC strip curtainsRemote fan-filter controlsIntegrated LED lightingMobile lockable base frame

Planning a Laminar Flow Canopy specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami