İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Personel ve Malzeme Dekontaminasyon Ekipmanları
Yüksek Mühürlü Paslanmaz Çelik Pass Kutusu
A fully stainless steel pass box with compression-gasket doors for controlled material movement across critical cleanroom boundaries.
- Welded stainless transfer chamber
- Compression perimeter gaskets
- Monitored two-door interlock
- Coved internal corners
Ürün tanıtımı
The High-Seal Stainless Steel Pass Box provides a robust material-transfer enclosure where door sealing and cleanable construction are both important. Its welded stainless chamber, coved corners and compression-gasket door leaves form a smooth internal envelope, while a monitored interlock keeps the two sides from opening together. Latch adjustment and gasket replacement can be specified to support routine maintenance over the service life of the unit.
Ana Özellikler
Multi-point latching distributes compression around each door gasket.
Door-position indication shows the state of each transfer side before release.
Formed internal radii make wiping the chamber surfaces more direct.
External service access can be arranged for latch and interlock adjustment.
Müşteri Ürün Sorunları
Transfers across sensitive room boundaries require dependable closure surfaces as well as a door sequence that prevents a direct opening.
Standard doors can apply uneven pressure to a perimeter gasket.Multi-point latches are arranged to compress the gasket around the door frame.
Open seams and sharp internal corners complicate wipe-down work.A continuously welded chamber with coved corners presents smooth stainless surfaces.
Operators may not know whether the opposite door is secure.Door-status monitoring keeps the release sequence visible at the pass box.
Sealing components need routine attention as the installation ages.Replaceable gasket profiles and accessible latch adjustment support planned maintenance.
Tipik uygulamalar
Containment-oriented pharmaceutical material transferLaboratory pressure-boundary pass-throughsSterile manufacturing support roomsBattery dry-room material movementControlled powder handling areas
Teknik parametreler
The following common configuration ranges describe the stainless construction and transfer geometry of this pass box.
| Temel malzemeler | SUS304 or SUS316L stainless steel chamber, doors and frame |
|---|---|
| Panel kalınlığı | 1.2–1.5 mm stainless steel chamber and door panels |
| Effective Width (Etkili Genişlik) | 500–1000 mm clear chamber width |
| Maksimum uzunluk | 600–1200 mm chamber depth |
| Çelik yüz yüze kalınlığı | 1.2–1.5 mm SUS304 or SUS316L |
| Core Density (Çekirdek Yoğunluğu) | Paslanmaz çelik için 7900-8000 kg / m3 |
| Termal İletkenlik | Paslanmaz çelik için 14-16 W / (m · K) |
| Yüzey bitirme | Brushed or electropolished stainless steel with coved interior |
| Ortak tip | Continuously welded chamber with compression-gasket interlocked doors |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
SUS316L contact surfacesInflatable or compression door gasketsWall-clamping installation frameDoor-status beacon or buzzer
Planning a High-Seal Stainless Steel Pass Box specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
