High-seal stainless steel pass box with interlocked doors

人員 · 材料の汚染除去設備

高密封のステンレス鋼のパスボックス

A fully stainless steel pass box with compression-gasket doors for controlled material movement across critical cleanroom boundaries.

Welded stainless transfer chamber
Compression perimeter gaskets
Monitored two-door interlock
Coved internal corners

見積もりリクエスト製品案内

商品紹介

The High-Seal Stainless Steel Pass Box provides a robust material-transfer enclosure where door sealing and cleanable construction are both important. Its welded stainless chamber, coved corners and compression-gasket door leaves form a smooth internal envelope, while a monitored interlock keeps the two sides from opening together. Latch adjustment and gasket replacement can be specified to support routine maintenance over the service life of the unit.

主要な特徴

Continuous chamber welds avoid open internal panel seams.

Multi-point latching distributes compression around each door gasket.

Door-position indication shows the state of each transfer side before release.

Formed internal radii make wiping the chamber surfaces more direct.

External service access can be arranged for latch and interlock adjustment.

お客様の製品に関する懸念事項

Transfers across sensitive room boundaries require dependable closure surfaces as well as a door sequence that prevents a direct opening.

Standard doors can apply uneven pressure to a perimeter gasket.Multi-point latches are arranged to compress the gasket around the door frame.

Open seams and sharp internal corners complicate wipe-down work.A continuously welded chamber with coved corners presents smooth stainless surfaces.

Operators may not know whether the opposite door is secure.Door-status monitoring keeps the release sequence visible at the pass box.

Sealing components need routine attention as the installation ages.Replaceable gasket profiles and accessible latch adjustment support planned maintenance.

典型的な用途

Containment-oriented pharmaceutical material transferLaboratory pressure-boundary pass-throughsSterile manufacturing support roomsBattery dry-room material movementControlled powder handling areas

技術的なパラメータ

The following common configuration ranges describe the stainless construction and transfer geometry of this pass box.

コア材料	SUS304 or SUS316L stainless steel chamber, doors and frame
パネルの厚さ	1.2–1.5 mm stainless steel chamber and door panels
有効幅	500–1000 mm clear chamber width
最大長さ	600–1200 mm chamber depth
鋼鉄の厚さを直面する	1.2–1.5 mm SUS304 or SUS316L
コア密度	7900–8000 kg/m³ for stainless steel
熱伝導率	14–16 W/(m·K) for stainless steel
表面仕上げ	Brushed or electropolished stainless steel with coved interior
ジョイントタイプ	Continuously welded chamber with compression-gasket interlocked doors
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

SUS316L contact surfacesInflatable or compression door gasketsWall-clamping installation frameDoor-status beacon or buzzer

Planning a High-Seal Stainless Steel Pass Box specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する