Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Equipement de décontamination du personnel et du matériel
Z Boîte de passage en acier inoxydable High-Seal
A fully stainless steel pass box with compression-gasket doors for controlled material movement across critical cleanroom boundaries.
- Welded stainless transfer chamber
- Compression perimeter gaskets
- Monitored two-door interlock
- Coved internal corners
Introduction de produit
The High-Seal Stainless Steel Pass Box provides a robust material-transfer enclosure where door sealing and cleanable construction are both important. Its welded stainless chamber, coved corners and compression-gasket door leaves form a smooth internal envelope, while a monitored interlock keeps the two sides from opening together. Latch adjustment and gasket replacement can be specified to support routine maintenance over the service life of the unit.
Key Features
Multi-point latching distributes compression around each door gasket.
Door-position indication shows the state of each transfer side before release.
Formed internal radii make wiping the chamber surfaces more direct.
External service access can be arranged for latch and interlock adjustment.
Préoccupations du client produit
Transfers across sensitive room boundaries require dependable closure surfaces as well as a door sequence that prevents a direct opening.
Standard doors can apply uneven pressure to a perimeter gasket.Multi-point latches are arranged to compress the gasket around the door frame.
Open seams and sharp internal corners complicate wipe-down work.A continuously welded chamber with coved corners presents smooth stainless surfaces.
Operators may not know whether the opposite door is secure.Door-status monitoring keeps the release sequence visible at the pass box.
Sealing components need routine attention as the installation ages.Replaceable gasket profiles and accessible latch adjustment support planned maintenance.
Les applications typiques
Containment-oriented pharmaceutical material transferLaboratory pressure-boundary pass-throughsSterile manufacturing support roomsBattery dry-room material movementControlled powder handling areas
Paramètres techniques
The following common configuration ranges describe the stainless construction and transfer geometry of this pass box.
| Matériaux de base | SUS304 or SUS316L stainless steel chamber, doors and frame |
|---|---|
| Panneau épaisseur | 1.2–1.5 mm stainless steel chamber and door panels |
| Largeur effective | 500–1000 mm clear chamber width |
| Longueur maximale | 600–1200 mm chamber depth |
| Acier face épaisseur | 1.2–1.5 mm SUS304 or SUS316L |
| Densité Core | 7900–8000 kg/m³ for stainless steel |
| Conductivité thermique | 14–16 W/(m·K) for stainless steel |
| surface finie | Brushed or electropolished stainless steel with coved interior |
| Type joint | Continuously welded chamber with compression-gasket interlocked doors |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
SUS316L contact surfacesInflatable or compression door gasketsWall-clamping installation frameDoor-status beacon or buzzer
Planning a High-Seal Stainless Steel Pass Box specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
