High-seal stainless steel pass box with interlocked doors

인력 및 재료 오염 제거 장비

High - Seal 스테인레스 스틸 패스 박스

A fully stainless steel pass box with compression-gasket doors for controlled material movement across critical cleanroom boundaries.

Welded stainless transfer chamber
Compression perimeter gaskets
Monitored two-door interlock
Coved internal corners

견적 요청 제품 찾아보기

상품 소개

The High-Seal Stainless Steel Pass Box provides a robust material-transfer enclosure where door sealing and cleanable construction are both important. Its welded stainless chamber, coved corners and compression-gasket door leaves form a smooth internal envelope, while a monitored interlock keeps the two sides from opening together. Latch adjustment and gasket replacement can be specified to support routine maintenance over the service life of the unit.

주요 기능

Continuous chamber welds avoid open internal panel seams.

Multi-point latching distributes compression around each door gasket.

Door-position indication shows the state of each transfer side before release.

Formed internal radii make wiping the chamber surfaces more direct.

External service access can be arranged for latch and interlock adjustment.

고객 제품 관심사

Transfers across sensitive room boundaries require dependable closure surfaces as well as a door sequence that prevents a direct opening.

Standard doors can apply uneven pressure to a perimeter gasket.Multi-point latches are arranged to compress the gasket around the door frame.

Open seams and sharp internal corners complicate wipe-down work.A continuously welded chamber with coved corners presents smooth stainless surfaces.

Operators may not know whether the opposite door is secure.Door-status monitoring keeps the release sequence visible at the pass box.

Sealing components need routine attention as the installation ages.Replaceable gasket profiles and accessible latch adjustment support planned maintenance.

일반적인 응용 프로그램

Containment-oriented pharmaceutical material transferLaboratory pressure-boundary pass-throughsSterile manufacturing support roomsBattery dry-room material movementControlled powder handling areas

기술 매개변수

The following common configuration ranges describe the stainless construction and transfer geometry of this pass box.

핵심 재료	SUS304 or SUS316L stainless steel chamber, doors and frame
패널 두께	1.2–1.5 mm stainless steel chamber and door panels
유효 폭	500–1000 mm clear chamber width
최대 길이	600–1200 mm chamber depth
강철 면면 두께	1.2–1.5 mm SUS304 or SUS316L
코어 밀도	7900–8000 kg/m³ for stainless steel
열전도도 (Thermal Conductivity)	14–16 W/(m·K) for stainless steel
표면 마무리	Brushed or electropolished stainless steel with coved interior
접합 유형	Continuously welded chamber with compression-gasket interlocked doors
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

SUS316L contact surfacesInflatable or compression door gasketsWall-clamping installation frameDoor-status beacon or buzzer

Planning a High-Seal Stainless Steel Pass Box specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.