High-seal stainless steel pass box with interlocked doors

Peralatan Dekontaminasi Personil dan Bahan

Kotak Stainless Steel Pass Segel Tinggi

A fully stainless steel pass box with compression-gasket doors for controlled material movement across critical cleanroom boundaries.

Welded stainless transfer chamber
Compression perimeter gaskets
Monitored two-door interlock
Coved internal corners

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The High-Seal Stainless Steel Pass Box provides a robust material-transfer enclosure where door sealing and cleanable construction are both important. Its welded stainless chamber, coved corners and compression-gasket door leaves form a smooth internal envelope, while a monitored interlock keeps the two sides from opening together. Latch adjustment and gasket replacement can be specified to support routine maintenance over the service life of the unit.

Fitur utama:

Continuous chamber welds avoid open internal panel seams.

Multi-point latching distributes compression around each door gasket.

Door-position indication shows the state of each transfer side before release.

Formed internal radii make wiping the chamber surfaces more direct.

External service access can be arranged for latch and interlock adjustment.

Kekhawatiran produk pelanggan

Transfers across sensitive room boundaries require dependable closure surfaces as well as a door sequence that prevents a direct opening.

Standard doors can apply uneven pressure to a perimeter gasket.Multi-point latches are arranged to compress the gasket around the door frame.

Open seams and sharp internal corners complicate wipe-down work.A continuously welded chamber with coved corners presents smooth stainless surfaces.

Operators may not know whether the opposite door is secure.Door-status monitoring keeps the release sequence visible at the pass box.

Sealing components need routine attention as the installation ages.Replaceable gasket profiles and accessible latch adjustment support planned maintenance.

Aplikasi yang Tipis

Containment-oriented pharmaceutical material transferLaboratory pressure-boundary pass-throughsSterile manufacturing support roomsBattery dry-room material movementControlled powder handling areas

Parameter teknis

The following common configuration ranges describe the stainless construction and transfer geometry of this pass box.

Bahan inti	SUS304 or SUS316L stainless steel chamber, doors and frame
Ketebalan Panel (Panel Thickness)	1.2–1.5 mm stainless steel chamber and door panels
Efektif lebar	500–1000 mm clear chamber width
Panjang maksimum	600–1200 mm chamber depth
Baja menghadap ketebalan	1.2–1.5 mm SUS304 or SUS316L
Kepadatan inti (core density)	7900–8000 kg/m³ for stainless steel
Konduktivitas Termal (Thermal Conductivity)	14–16 W/(m·K) for stainless steel
Permukaan selesai	Brushed or electropolished stainless steel with coved interior
Jenis Bersama	Continuously welded chamber with compression-gasket interlocked doors
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

SUS316L contact surfacesInflatable or compression door gasketsWall-clamping installation frameDoor-status beacon or buzzer

Planning a High-Seal Stainless Steel Pass Box specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami