İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kapıları, Pencereler ve Kilitleme Sistemleri
Temiz Oda Kaydırma Kanalı Kapı Kapı Kapısı
A rack-and-pinion overhead closer with a slim slide rail that controls the opening cycle without the projecting elbow of a scissor arm.
- Low-Projection Slide Rail
- Adjustable Closing Speed
- Controlled Latching Action
- Reversible Mounting
Ürün tanıtımı
The slide-channel closer mounts to the cleanroom door or header and transfers motion through a compact guide rail. Hydraulic valves meter the main closing sweep and final latch zone so the leaf returns consistently without slamming against perimeter seals. Its shallow geometry reduces overhead projection, while adjustable spring force allows the closer to be matched to door width, seal compression and expected air-pressure load.
Ana Özellikler
Independent hydraulic adjustments tune the closing sweep and final latching segment.
Selectable spring power accommodates different leaf masses and perimeter-gasket resistance.
A sealed aluminum body protects the rack, pinion and hydraulic fluid from routine wipe-down exposure.
Müşteri Ürün Sorunları
Cleanroom doors need enough final force to compress seals, but uncontrolled closing can damage hardware and disturb nearby operations.
A heavy sealed door may stop before the latch or magnetic contact reaches its final position.The latching-speed valve and spring power are adjusted for the final seal-compression zone.
A projecting articulated arm conflicts with a shallow header or nearby ceiling services.The slide rail keeps the transmission arm close to the door plane.
Pressure differences make closing speed inconsistent between rooms.Hydraulic sweep control moderates the movement across the closing arc.
Tipik uygulamalar
Personnel cleanroom doorsLaboratory corridor doorsHospital controlled-area entrancesAirlock swing doors
Teknik parametreler
Typical dimensions and materials for a medium-duty slide-channel cleanroom door closer are provided below.
| Temel malzemeler | Hardened steel rack and pinion in a cast aluminum hydraulic body |
|---|---|
| Panel kalınlığı | Approximately 47–50 mm closer-body depth |
| Effective Width (Etkili Genişlik) | Approximately 55–60 mm body height |
| Maksimum uzunluk | Approximately 440 mm guide-channel length |
| Çelik yüz yüze kalınlığı | 1.2–2.0 mm decorative steel or aluminum cover |
| Core Density (Çekirdek Yoğunluğu) | Approximately 2700 kg/m³ for the cast aluminum body |
| Termal İletkenlik | Approximately 160–205 W/(m·K) for the aluminum closer body |
| Yüzey bitirme | Silver anodized, stainless-effect or black coated cover |
| Ortak tip | Surface-mounted closer body linked to a header slide channel and guide block |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Adjustable EN 1–4 spring rangeHold-open or non-hold-open slide railSilver, black or stainless-effect coverDoor- or frame-mounted arrangement
Planning a Cleanroom Slide-Channel Door Closer specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
