Slide-channel door closer with guide rail for cleanroom swing doors

클린룸 도어, 창문 및 인터락 시스템

클린룸 슬라이드 채널 도어 클로저

A rack-and-pinion overhead closer with a slim slide rail that controls the opening cycle without the projecting elbow of a scissor arm.

Low-Projection Slide Rail
Adjustable Closing Speed
Controlled Latching Action
Reversible Mounting

견적 요청 제품 찾아보기

상품 소개

The slide-channel closer mounts to the cleanroom door or header and transfers motion through a compact guide rail. Hydraulic valves meter the main closing sweep and final latch zone so the leaf returns consistently without slamming against perimeter seals. Its shallow geometry reduces overhead projection, while adjustable spring force allows the closer to be matched to door width, seal compression and expected air-pressure load.

주요 기능

A guided slide arm preserves clearance around narrow corridors and overhead equipment.

Independent hydraulic adjustments tune the closing sweep and final latching segment.

Selectable spring power accommodates different leaf masses and perimeter-gasket resistance.

A sealed aluminum body protects the rack, pinion and hydraulic fluid from routine wipe-down exposure.

고객 제품 관심사

Cleanroom doors need enough final force to compress seals, but uncontrolled closing can damage hardware and disturb nearby operations.

A heavy sealed door may stop before the latch or magnetic contact reaches its final position.The latching-speed valve and spring power are adjusted for the final seal-compression zone.

A projecting articulated arm conflicts with a shallow header or nearby ceiling services.The slide rail keeps the transmission arm close to the door plane.

Pressure differences make closing speed inconsistent between rooms.Hydraulic sweep control moderates the movement across the closing arc.

일반적인 응용 프로그램

Personnel cleanroom doorsLaboratory corridor doorsHospital controlled-area entrancesAirlock swing doors

기술 매개변수

Typical dimensions and materials for a medium-duty slide-channel cleanroom door closer are provided below.

핵심 재료	Hardened steel rack and pinion in a cast aluminum hydraulic body
패널 두께	Approximately 47–50 mm closer-body depth
유효 폭	Approximately 55–60 mm body height
최대 길이	Approximately 440 mm guide-channel length
강철 면면 두께	1.2–2.0 mm decorative steel or aluminum cover
코어 밀도	Approximately 2700 kg/m³ for the cast aluminum body
열전도도 (Thermal Conductivity)	Approximately 160–205 W/(m·K) for the aluminum closer body
표면 마무리	Silver anodized, stainless-effect or black coated cover
접합 유형	Surface-mounted closer body linked to a header slide channel and guide block
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Adjustable EN 1–4 spring rangeHold-open or non-hold-open slide railSilver, black or stainless-effect coverDoor- or frame-mounted arrangement

Planning a Cleanroom Slide-Channel Door Closer specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.