Slide-channel door closer with guide rail for cleanroom swing doors

クリーンルームのドア、窓およびインターロックシステム

クリーンルームスライドチャネルドアクローザー

A rack-and-pinion overhead closer with a slim slide rail that controls the opening cycle without the projecting elbow of a scissor arm.

Low-Projection Slide Rail
Adjustable Closing Speed
Controlled Latching Action
Reversible Mounting

見積もりリクエスト製品案内

商品紹介

The slide-channel closer mounts to the cleanroom door or header and transfers motion through a compact guide rail. Hydraulic valves meter the main closing sweep and final latch zone so the leaf returns consistently without slamming against perimeter seals. Its shallow geometry reduces overhead projection, while adjustable spring force allows the closer to be matched to door width, seal compression and expected air-pressure load.

主要な特徴

A guided slide arm preserves clearance around narrow corridors and overhead equipment.

Independent hydraulic adjustments tune the closing sweep and final latching segment.

Selectable spring power accommodates different leaf masses and perimeter-gasket resistance.

A sealed aluminum body protects the rack, pinion and hydraulic fluid from routine wipe-down exposure.

お客様の製品に関する懸念事項

Cleanroom doors need enough final force to compress seals, but uncontrolled closing can damage hardware and disturb nearby operations.

A heavy sealed door may stop before the latch or magnetic contact reaches its final position.The latching-speed valve and spring power are adjusted for the final seal-compression zone.

A projecting articulated arm conflicts with a shallow header or nearby ceiling services.The slide rail keeps the transmission arm close to the door plane.

Pressure differences make closing speed inconsistent between rooms.Hydraulic sweep control moderates the movement across the closing arc.

典型的な用途

Personnel cleanroom doorsLaboratory corridor doorsHospital controlled-area entrancesAirlock swing doors

技術的なパラメータ

Typical dimensions and materials for a medium-duty slide-channel cleanroom door closer are provided below.

コア材料	Hardened steel rack and pinion in a cast aluminum hydraulic body
パネルの厚さ	Approximately 47–50 mm closer-body depth
有効幅	Approximately 55–60 mm body height
最大長さ	Approximately 440 mm guide-channel length
鋼鉄の厚さを直面する	1.2–2.0 mm decorative steel or aluminum cover
コア密度	Approximately 2700 kg/m³ for the cast aluminum body
熱伝導率	Approximately 160–205 W/(m·K) for the aluminum closer body
表面仕上げ	Silver anodized, stainless-effect or black coated cover
ジョイントタイプ	Surface-mounted closer body linked to a header slide channel and guide block
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Adjustable EN 1–4 spring rangeHold-open or non-hold-open slide railSilver, black or stainless-effect coverDoor- or frame-mounted arrangement

Planning a Cleanroom Slide-Channel Door Closer specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する