Slide-channel door closer with guide rail for cleanroom swing doors

Pintu Cleanroom, Jendela dan Sistem Interlock

Cleanroom Slide-Channel Door Closer

A rack-and-pinion overhead closer with a slim slide rail that controls the opening cycle without the projecting elbow of a scissor arm.

Low-Projection Slide Rail
Adjustable Closing Speed
Controlled Latching Action
Reversible Mounting

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The slide-channel closer mounts to the cleanroom door or header and transfers motion through a compact guide rail. Hydraulic valves meter the main closing sweep and final latch zone so the leaf returns consistently without slamming against perimeter seals. Its shallow geometry reduces overhead projection, while adjustable spring force allows the closer to be matched to door width, seal compression and expected air-pressure load.

Fitur utama:

A guided slide arm preserves clearance around narrow corridors and overhead equipment.

Independent hydraulic adjustments tune the closing sweep and final latching segment.

Selectable spring power accommodates different leaf masses and perimeter-gasket resistance.

A sealed aluminum body protects the rack, pinion and hydraulic fluid from routine wipe-down exposure.

Kekhawatiran produk pelanggan

Cleanroom doors need enough final force to compress seals, but uncontrolled closing can damage hardware and disturb nearby operations.

A heavy sealed door may stop before the latch or magnetic contact reaches its final position.The latching-speed valve and spring power are adjusted for the final seal-compression zone.

A projecting articulated arm conflicts with a shallow header or nearby ceiling services.The slide rail keeps the transmission arm close to the door plane.

Pressure differences make closing speed inconsistent between rooms.Hydraulic sweep control moderates the movement across the closing arc.

Aplikasi yang Tipis

Personnel cleanroom doorsLaboratory corridor doorsHospital controlled-area entrancesAirlock swing doors

Parameter teknis

Typical dimensions and materials for a medium-duty slide-channel cleanroom door closer are provided below.

Bahan inti	Hardened steel rack and pinion in a cast aluminum hydraulic body
Ketebalan Panel (Panel Thickness)	Approximately 47–50 mm closer-body depth
Efektif lebar	Approximately 55–60 mm body height
Panjang maksimum	Approximately 440 mm guide-channel length
Baja menghadap ketebalan	1.2–2.0 mm decorative steel or aluminum cover
Kepadatan inti (core density)	Approximately 2700 kg/m³ for the cast aluminum body
Konduktivitas Termal (Thermal Conductivity)	Approximately 160–205 W/(m·K) for the aluminum closer body
Permukaan selesai	Silver anodized, stainless-effect or black coated cover
Jenis Bersama	Surface-mounted closer body linked to a header slide channel and guide block
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Adjustable EN 1–4 spring rangeHold-open or non-hold-open slide railSilver, black or stainless-effect coverDoor- or frame-mounted arrangement

Planning a Cleanroom Slide-Channel Door Closer specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami