Slide-channel door closer with guide rail for cleanroom swing doors

Двери в чистых помещениях, окна и системы блокировки

Закрыватель сдвижного канала для дверей в чистой комнате

A rack-and-pinion overhead closer with a slim slide rail that controls the opening cycle without the projecting elbow of a scissor arm.

Low-Projection Slide Rail
Adjustable Closing Speed
Controlled Latching Action
Reversible Mounting

Запрос котировки Просмотреть продукты

Введение продукции

The slide-channel closer mounts to the cleanroom door or header and transfers motion through a compact guide rail. Hydraulic valves meter the main closing sweep and final latch zone so the leaf returns consistently without slamming against perimeter seals. Its shallow geometry reduces overhead projection, while adjustable spring force allows the closer to be matched to door width, seal compression and expected air-pressure load.

Основные характеристики

A guided slide arm preserves clearance around narrow corridors and overhead equipment.

Independent hydraulic adjustments tune the closing sweep and final latching segment.

Selectable spring power accommodates different leaf masses and perimeter-gasket resistance.

A sealed aluminum body protects the rack, pinion and hydraulic fluid from routine wipe-down exposure.

Обеспокоенность клиентов продуктами

Cleanroom doors need enough final force to compress seals, but uncontrolled closing can damage hardware and disturb nearby operations.

A heavy sealed door may stop before the latch or magnetic contact reaches its final position.The latching-speed valve and spring power are adjusted for the final seal-compression zone.

A projecting articulated arm conflicts with a shallow header or nearby ceiling services.The slide rail keeps the transmission arm close to the door plane.

Pressure differences make closing speed inconsistent between rooms.Hydraulic sweep control moderates the movement across the closing arc.

Типичные приложения

Personnel cleanroom doorsLaboratory corridor doorsHospital controlled-area entrancesAirlock swing doors

Технические параметры

Typical dimensions and materials for a medium-duty slide-channel cleanroom door closer are provided below.

Основной материал	Hardened steel rack and pinion in a cast aluminum hydraulic body
Толщина панели	Approximately 47–50 mm closer-body depth
эффективная ширина	Approximately 55–60 mm body height
Максимальная длина	Approximately 440 mm guide-channel length
Толщина линий стали	1.2–2.0 mm decorative steel or aluminum cover
Плотность ядра	Approximately 2700 kg/m³ for the cast aluminum body
Теплопроводимость	Approximately 160–205 W/(m·K) for the aluminum closer body
Поверхностная отделка	Silver anodized, stainless-effect or black coated cover
Объединенный тип	Surface-mounted closer body linked to a header slide channel and guide block
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Adjustable EN 1–4 spring rangeHold-open or non-hold-open slide railSilver, black or stainless-effect coverDoor- or frame-mounted arrangement

Planning a Cleanroom Slide-Channel Door Closer specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой