İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Personel ve Malzeme Dekontaminasyon Ekipmanları
Otomatik Walk-Through Boot yıkayıcı
A walk-through stainless steel boot washer with horizontal sole brushes and vertical brushes for the lower boot shaft.
- Sole and boot-shaft brushes
- Continuous walk-through action
- Controlled solution application
- Open drainable wash basin
Ürün tanıtımı
The Automatic Walk-Through Boot Washer combines horizontal rotating brushes below the sole with vertical brushes positioned for the sides and lower shafts of work boots. An approach sensor or handrail switch can start the brush drive and compatible cleaning-solution application as personnel enter. The wet zone uses a sloped stainless basin, removable brush modules and accessible strainers so daily wash-down is not hidden behind permanent guards.
Ana Özellikler
Vertical brushes reach the sides and lower shaft that a flat sole cleaner does not address.
Sensor-controlled solution application can limit flow to occupied cycles.
Handrails support stable movement across the rotating brush zone.
Lift-out brush modules and drain strainers make the wash basin accessible for cleaning.
Müşteri Ürün Sorunları
Where boots are used, contamination can extend beyond the sole and cannot be addressed by a flat brush or tack mat alone.
Residue remains around the heel, sidewall and lower boot shaft.Vertical side brushes work with the horizontal sole brushes to reach several footwear surfaces.
Manual hose cleaning gives inconsistent mechanical contact during entry.A sensor-started walk-through brush path gives each passage a repeatable cleaning action.
Soiled water collects below brushes and makes sanitation difficult.A sloped basin, accessible strainers and removable brush modules expose the wet zone.
Wet footwear zones can become unstable for users moving between areas.Handrails and non-slip grating support controlled movement through the machine.
Tipik uygulamalar
Food processing hygiene entriesPharmaceutical support productionAnimal-health manufacturingIngredient preparation roomsWet-cleaned controlled facilities
Teknik parametreler
The number of side brushes, track length and solution arrangement can be specified for the boot profile and traffic pattern.
| Temel malzemeler | Food-grade polypropylene brush cores in a welded SUS304 wash basin |
|---|---|
| Panel kalınlığı | 1.5–2.0 mm stainless steel body panels |
| Effective Width (Etkili Genişlik) | 450–700 mm clear walking width |
| Maksimum uzunluk | 1200–2600 mm overall machine length |
| Çelik yüz yüze kalınlığı | 1.5–2.0 mm SUS304 |
| Core Density (Çekirdek Yoğunluğu) | 900–1100 kg/m³ for polypropylene brush cores |
| Termal İletkenlik | 0.10–0.22 W/(m·K) for polymer brush components |
| Yüzey bitirme | Brushed SUS304 with hygienic welds and non-slip grating |
| Ortak tip | Continuous welded drain basin with removable sole and shaft brush modules |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Extended pre-clean sole trackThree or four shaft brushesWater or compatible cleaning-solution feedSide bypass for low footwear
Planning a Automatic Walk-Through Boot Washer specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
