Automatic walk-through boot washer with sole and shaft brushes

Peralatan Dekontaminasi Kakitangan dan Bahan

Mesin Basuh Boot Walk-Through Automatik

A walk-through stainless steel boot washer with horizontal sole brushes and vertical brushes for the lower boot shaft.

Sole and boot-shaft brushes
Continuous walk-through action
Controlled solution application
Open drainable wash basin

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The Automatic Walk-Through Boot Washer combines horizontal rotating brushes below the sole with vertical brushes positioned for the sides and lower shafts of work boots. An approach sensor or handrail switch can start the brush drive and compatible cleaning-solution application as personnel enter. The wet zone uses a sloped stainless basin, removable brush modules and accessible strainers so daily wash-down is not hidden behind permanent guards.

Ciri-ciri Utama

Horizontal brush rows work across the sole as the wearer walks forward.

Vertical brushes reach the sides and lower shaft that a flat sole cleaner does not address.

Sensor-controlled solution application can limit flow to occupied cycles.

Handrails support stable movement across the rotating brush zone.

Lift-out brush modules and drain strainers make the wash basin accessible for cleaning.

Kebimbangan Produk Pelanggan

Where boots are used, contamination can extend beyond the sole and cannot be addressed by a flat brush or tack mat alone.

Residue remains around the heel, sidewall and lower boot shaft.Vertical side brushes work with the horizontal sole brushes to reach several footwear surfaces.

Manual hose cleaning gives inconsistent mechanical contact during entry.A sensor-started walk-through brush path gives each passage a repeatable cleaning action.

Soiled water collects below brushes and makes sanitation difficult.A sloped basin, accessible strainers and removable brush modules expose the wet zone.

Wet footwear zones can become unstable for users moving between areas.Handrails and non-slip grating support controlled movement through the machine.

Permohonan yang biasa

Food processing hygiene entriesPharmaceutical support productionAnimal-health manufacturingIngredient preparation roomsWet-cleaned controlled facilities

Parameter teknikal

The number of side brushes, track length and solution arrangement can be specified for the boot profile and traffic pattern.

Bahan Teras	Food-grade polypropylene brush cores in a welded SUS304 wash basin
Ketebalan Panel	1.5–2.0 mm stainless steel body panels
Lebar berkesan	450–700 mm clear walking width
Panjang maksimum	1200–2600 mm overall machine length
Keluli Menghadapi Ketebalan	1.5–2.0 mm SUS304
Ketumpatan teras	900–1100 kg/m³ for polypropylene brush cores
Kekonduksian Terma	0.10–0.22 W/(m·K) for polymer brush components
Kemasan permukaan	Brushed SUS304 with hygienic welds and non-slip grating
Jenis Bersatu	Continuous welded drain basin with removable sole and shaft brush modules
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Extended pre-clean sole trackThree or four shaft brushesWater or compatible cleaning-solution feedSide bypass for low footwear

Planning a Automatic Walk-Through Boot Washer specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami