Automatic walk-through boot washer with sole and shaft brushes

人員 · 材料の汚染除去設備

自動ウォークスルーブーツ洗濯機

A walk-through stainless steel boot washer with horizontal sole brushes and vertical brushes for the lower boot shaft.

Sole and boot-shaft brushes
Continuous walk-through action
Controlled solution application
Open drainable wash basin

商品紹介

The Automatic Walk-Through Boot Washer combines horizontal rotating brushes below the sole with vertical brushes positioned for the sides and lower shafts of work boots. An approach sensor or handrail switch can start the brush drive and compatible cleaning-solution application as personnel enter. The wet zone uses a sloped stainless basin, removable brush modules and accessible strainers so daily wash-down is not hidden behind permanent guards.

主要な特徴

Horizontal brush rows work across the sole as the wearer walks forward.

Vertical brushes reach the sides and lower shaft that a flat sole cleaner does not address.

Sensor-controlled solution application can limit flow to occupied cycles.

Handrails support stable movement across the rotating brush zone.

Lift-out brush modules and drain strainers make the wash basin accessible for cleaning.

お客様の製品に関する懸念事項

Where boots are used, contamination can extend beyond the sole and cannot be addressed by a flat brush or tack mat alone.

Residue remains around the heel, sidewall and lower boot shaft.Vertical side brushes work with the horizontal sole brushes to reach several footwear surfaces.

Manual hose cleaning gives inconsistent mechanical contact during entry.A sensor-started walk-through brush path gives each passage a repeatable cleaning action.

Soiled water collects below brushes and makes sanitation difficult.A sloped basin, accessible strainers and removable brush modules expose the wet zone.

Wet footwear zones can become unstable for users moving between areas.Handrails and non-slip grating support controlled movement through the machine.

典型的な用途

Food processing hygiene entriesPharmaceutical support productionAnimal-health manufacturingIngredient preparation roomsWet-cleaned controlled facilities

技術的なパラメータ

The number of side brushes, track length and solution arrangement can be specified for the boot profile and traffic pattern.

コア材料	Food-grade polypropylene brush cores in a welded SUS304 wash basin
パネルの厚さ	1.5–2.0 mm stainless steel body panels
有効幅	450–700 mm clear walking width
最大長さ	1200–2600 mm overall machine length
鋼鉄の厚さを直面する	1.5–2.0 mm SUS304
コア密度	900–1100 kg/m³ for polypropylene brush cores
熱伝導率	0.10–0.22 W/(m·K) for polymer brush components
表面仕上げ	Brushed SUS304 with hygienic welds and non-slip grating
ジョイントタイプ	Continuous welded drain basin with removable sole and shaft brush modules
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Extended pre-clean sole trackThree or four shaft brushesWater or compatible cleaning-solution feedSide bypass for low footwear

Planning a Automatic Walk-Through Boot Washer specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する