Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de descontaminación de personal y material
Lavadora automática Walk-Through Boot por
A walk-through stainless steel boot washer with horizontal sole brushes and vertical brushes for the lower boot shaft.
- Sole and boot-shaft brushes
- Continuous walk-through action
- Controlled solution application
- Open drainable wash basin
Introducción del producto
The Automatic Walk-Through Boot Washer combines horizontal rotating brushes below the sole with vertical brushes positioned for the sides and lower shafts of work boots. An approach sensor or handrail switch can start the brush drive and compatible cleaning-solution application as personnel enter. The wet zone uses a sloped stainless basin, removable brush modules and accessible strainers so daily wash-down is not hidden behind permanent guards.
Características clave
Vertical brushes reach the sides and lower shaft that a flat sole cleaner does not address.
Sensor-controlled solution application can limit flow to occupied cycles.
Handrails support stable movement across the rotating brush zone.
Lift-out brush modules and drain strainers make the wash basin accessible for cleaning.
Preocupaciones del producto del cliente
Where boots are used, contamination can extend beyond the sole and cannot be addressed by a flat brush or tack mat alone.
Residue remains around the heel, sidewall and lower boot shaft.Vertical side brushes work with the horizontal sole brushes to reach several footwear surfaces.
Manual hose cleaning gives inconsistent mechanical contact during entry.A sensor-started walk-through brush path gives each passage a repeatable cleaning action.
Soiled water collects below brushes and makes sanitation difficult.A sloped basin, accessible strainers and removable brush modules expose the wet zone.
Wet footwear zones can become unstable for users moving between areas.Handrails and non-slip grating support controlled movement through the machine.
Aplicaciones típicas
Food processing hygiene entriesPharmaceutical support productionAnimal-health manufacturingIngredient preparation roomsWet-cleaned controlled facilities
Parámetros técnicos
The number of side brushes, track length and solution arrangement can be specified for the boot profile and traffic pattern.
| Materiales Core | Food-grade polypropylene brush cores in a welded SUS304 wash basin |
|---|---|
| Panel de espesor | 1.5–2.0 mm stainless steel body panels |
| Ancho efectivo | 450–700 mm clear walking width |
| Longitud máxima | 1200–2600 mm overall machine length |
| Acero frente a espesor | 1.5–2.0 mm SUS304 |
| Densidad Core | 900–1100 kg/m³ for polypropylene brush cores |
| Conductividad térmica | 0.10–0.22 W/(m·K) for polymer brush components |
| Superficie acabada | Brushed SUS304 with hygienic welds and non-slip grating |
| Tipo conjunto | Continuous welded drain basin with removable sole and shaft brush modules |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Extended pre-clean sole trackThree or four shaft brushesWater or compatible cleaning-solution feedSide bypass for low footwear
Planning a Automatic Walk-Through Boot Washer specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
