Automatic walk-through boot washer with sole and shaft brushes

인력 및 재료 오염 제거 장비

자동 워크스루 부트 세탁기

A walk-through stainless steel boot washer with horizontal sole brushes and vertical brushes for the lower boot shaft.

Sole and boot-shaft brushes
Continuous walk-through action
Controlled solution application
Open drainable wash basin

견적 요청 제품 찾아보기

상품 소개

The Automatic Walk-Through Boot Washer combines horizontal rotating brushes below the sole with vertical brushes positioned for the sides and lower shafts of work boots. An approach sensor or handrail switch can start the brush drive and compatible cleaning-solution application as personnel enter. The wet zone uses a sloped stainless basin, removable brush modules and accessible strainers so daily wash-down is not hidden behind permanent guards.

주요 기능

Horizontal brush rows work across the sole as the wearer walks forward.

Vertical brushes reach the sides and lower shaft that a flat sole cleaner does not address.

Sensor-controlled solution application can limit flow to occupied cycles.

Handrails support stable movement across the rotating brush zone.

Lift-out brush modules and drain strainers make the wash basin accessible for cleaning.

고객 제품 관심사

Where boots are used, contamination can extend beyond the sole and cannot be addressed by a flat brush or tack mat alone.

Residue remains around the heel, sidewall and lower boot shaft.Vertical side brushes work with the horizontal sole brushes to reach several footwear surfaces.

Manual hose cleaning gives inconsistent mechanical contact during entry.A sensor-started walk-through brush path gives each passage a repeatable cleaning action.

Soiled water collects below brushes and makes sanitation difficult.A sloped basin, accessible strainers and removable brush modules expose the wet zone.

Wet footwear zones can become unstable for users moving between areas.Handrails and non-slip grating support controlled movement through the machine.

일반적인 응용 프로그램

Food processing hygiene entriesPharmaceutical support productionAnimal-health manufacturingIngredient preparation roomsWet-cleaned controlled facilities

기술 매개변수

The number of side brushes, track length and solution arrangement can be specified for the boot profile and traffic pattern.

핵심 재료	Food-grade polypropylene brush cores in a welded SUS304 wash basin
패널 두께	1.5–2.0 mm stainless steel body panels
유효 폭	450–700 mm clear walking width
최대 길이	1200–2600 mm overall machine length
강철 면면 두께	1.5–2.0 mm SUS304
코어 밀도	900–1100 kg/m³ for polypropylene brush cores
열전도도 (Thermal Conductivity)	0.10–0.22 W/(m·K) for polymer brush components
표면 마무리	Brushed SUS304 with hygienic welds and non-slip grating
접합 유형	Continuous welded drain basin with removable sole and shaft brush modules
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Extended pre-clean sole trackThree or four shaft brushesWater or compatible cleaning-solution feedSide bypass for low footwear

Planning a Automatic Walk-Through Boot Washer specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.