Complete aluminum honeycomb cleanroom sandwich panel with metal facings

Temiz Oda Duvar ve Tavan Sistemleri

Alüminyum Honeycomb Temiz Oda Sandwich Panel

A high-flatness cleanroom wall and ceiling panel using a hexagonal aluminum honeycomb core between smooth metal facings, combining low weight, non-shedding construction and strong resistance to bending.

Aluminum Honeycomb Core
High Strength-to-Weight Ratio
Excellent Surface Flatness
Non-Shedding Interior

Alıntı isteği Browse ürünleri

Ürün tanıtımı

Aluminum Honeycomb Cleanroom Panels use thin aluminum foil formed into hexagonal cells and bonded between metal skins. Thousands of cell walls support the facings, giving the panel high bending stiffness without the mass of a dense mineral core. The all-metal cellular center does not release fibres and is well suited to smooth wall modules and accessible ceilings. Four-sided aluminum framing closes the core and provides accurate connections for tongues, trims and suspension hardware. Local reinforcement can be built in where lights or service equipment impose concentrated loads.

Ana Özellikler

Hexagonal cells act as closely spaced webs that resist bending in multiple directions.

Low core mass reduces ceiling dead load and simplifies lifting of large modules.

The aluminum core is non-shedding and remains dimensionally stable in normal indoor humidity.

Uniform cellular support produces a notably flat finished face.

Reinforced inserts can transfer localized equipment loads into the surrounding frame.

Müşteri Ürün Sorunları

Selection normally centers on local load reinforcement, edge closure, acoustic behavior and interface precision.

Ceiling panels must remain light while resisting deflection across service openings.Aluminum honeycomb provides high bending stiffness with substantially less core mass than dense mineral panels.

Fixtures can crush thin honeycomb cells when loads are applied at one small point.Solid inserts and perimeter rails spread concentrated loads into a wider panel area.

Open foil cells at cut edges can collect debris and complicate cleaning.Four-sided frames and finished cut-outs completely close every exposed honeycomb edge.

Poorly bonded skins can create visible local waviness.Controlled adhesive coverage and uniform pressing maintain continuous support across the panel face.

Tipik uygulamalar

Semiconductor and microelectronics cleanroomsWalk-access service ceilingsBiopharmaceutical production enclosuresPrecision laboratoriesHigh-flatness modular partitions

Teknik parametreler

Common cleanroom-grade aluminum honeycomb panel specifications are listed below.

Temel malzemeler	3003-series hexagonal aluminum honeycomb, 5–8 mm cell size
Panel kalınlığı	40, 50, 60 or 80 mm
Effective Width (Etkili Genişlik)	1100 or 1200 mm
Maksimum uzunluk	6000 mm
Çelik yüz yüze kalınlığı	0.50–0.60 mm
Core Density (Çekirdek Yoğunluğu)	Approximately 27 kg/m³
Termal İletkenlik	0.11–0.15 W/(m·K)
Yüzey bitirme	PVC-laminated, polyester-coated or stainless steel surface
Ortak tip	Four-sided aluminum frame with PVC or aluminum tongue
Customization (Özelleşme)	Kullanılan amaçlanan uygulama ve çalışma ortamına göre kullanılabilir

Mevcut Seçenekler

Load-bearing ceiling insertsStainless steel or aluminum facingAlternative honeycomb cell sizeIntegrated lighting and filter openings

Planning a Aluminum Honeycomb Cleanroom Sandwich Panel specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun